ZS-13 Slotted Replacement Nut for Classical Guitars

I installed this on an old Alvarez acoustic that used to belong to my Dad. The strings had started to buzz badly and the bridge height was maxed out so I knew it must be the nut. Took about an hour to cut down the new nut and shape with the Drexel tool; sided/polished the frets and installed glide nut with the tallest feet wire. Worked like a charm and no more buzzing. Even lowed the bridge down to a reasonable height as well. Great product and easy to install.

The bone nut was easy to install. I sanded the length and depth with a table sander. The instructions are complete and easy to follow. Four zero frets of different sizes are included in the banjo kit--you try the smallest and work your way up until you have no open string buzz. Use medium viscosity cyanoacrylate (available from Stewmac) so you have time to set the nut and fret properly. I'm pleased with the results, improved tone, and hammer-ons and pull-offs are more defined.

Had tuning stability and buzzing issues after ten years on my first bone nut. Also have always been bothered by open string vs. fretted string sounds. I play mostly flat picking/crosspicking styles and Travis style picking. The consistency of the note makes both more enjoyable for me. No buzzing lower action smoother tuning smoother playing easier bending etc... Have all been a result. Took me about two hours to get height and width of nut and fret correct. Had to get a smaller get shipped from gold tone and their customer service was the easiest I have ever experienced. Had part in two days and I am satisfied.

My old nut was too high. And I didn't want to buy 6 nut files. This Zero glide was much, MUCH cheaper, and it was an easy instal. I taped some 400 grit sandpaper to a plank I had laying around. Sand sand sand, check the fit, repeat. I tried each fret it came with and chose the jumbo. I consider this a major upgrade to my home built super strat.