Speak with an Instrument Expert during business hours!
Business Hours:
Mon-Fri: 8:30am - 5:00pm
Sat-Sun: Closed
You Call, We Answer!
Chat with a real person
Email us directly
More Information
1-800-826-5482
contact@goldtone.com
Live Chat
Find A Dealer
Return Policy
Warranty Registration
Return Authorization (RA)
The Zero Glide Replacement Nut System borrows the "zero fret" concept to reduce string contact in the nut by up to 93%, increasing tuning stability, playability, and open string tone. It only takes a few minutes to install with absolutely no permanent alteration to your instrument. For Classical Guitar.
See the Classical Guitar DelCamp review of the Classical Zero Glide nut.
Also available in Black Delrin.
I've owned guitars with zero frets and always wondered why the idea never really caught on...For me,It improves the feel,tuning stability and playability..I was interested when I saw this device and wondered if it was something I would be capable of installing without risk to my acoustic... it turned out to be easier than I'd hoped..with just a small amount of sanding I had it installed in less than an hour...I'll be ordering at least one more to try out on one of my electrics..thanks Bob M.
Love the zero glide nut! It makes my open strings ring longer and clear like a fretted note making chords that incorporate both sound more even. It took almost no time to install on my stratocAster and I'm going to mod my Tele now too.
I just installed a Zero Glide Nut on my '14 Les Paul Studio. I was having trouble with the traditional *tink* and tuning issues often associated with Gibsons. Initially, I was going to try the new titanium nut made by Gibson but was told that it would not fit my '14 Les Paul. Keep in mind, I have never installed a nut before on a guitar where I needed to remove the old one. I had only fixed broken nuts in the past. I say this because I had a little anxiety when I decided to install the nut myself. The first thing I noticed was how much extra material must be sanded to get a perfect fit. For my application, I had to sand the bottom of the nut as well to get the fret to seat properly against the fret board. This may sound bad, but it is a good thing! It means that the folks at Stew-Mac realize (as I hope you do) that although these are precision instruments, there are many parts that are finished out by hand. The extra material allows for those minor variations and with a little work,
I m impressed with this. Easy to install. I m not a luthiar but I have refretted a few guitars and made some nuts and saddles. This is a pretty incredible system. I was going to cut a new nut for an acoustic guitar I just bought. I tested it and it was not sliding perfectly through the nut even though there was no ping while tuning. The way I test a nut is to strike a note then smack the string between the nut and the machine heads. behind the nut I put a tuner on the head stock so I can watch the note go up and come back. It simulates a good bend and you can watch the quality of the nut you have on the guitar. Most guitars will stick at about 6 to 10 cents above the tuned note unless you have a really well cut nut. At least the wound strings will....steel strings will usually drop back to the tuned note if the nut is decent . The nut I had on this guitar was pretty good....no pings while tuning yet it would still catch occasionally which effected tuning.
$39.99
