Speak with an Instrument Expert during business hours!
Business Hours:
Mon-Fri: 8:30am - 5:00pm
Sat-Sun: Closed
You Call, We Answer!
Chat with a real person
Email us directly
More Information
1-800-826-5482
contact@goldtone.com
Live Chat
Find A Dealer
Return Policy
Warranty Registration
Return Authorization (RA)
The Zero Glide Replacement Nut System borrows the "zero fret" concept to reduce string contact in the nut by up to 93%, increasing tuning stability, playability, and open string tone. It only takes a few minutes to install with absolutely no permanent alteration to your instrument. For 12 String Guitar (Blank).
Also available in Black Delrin.
The bone nut was easy to install. I sanded the length and depth with a table sander. The instructions are complete and easy to follow. Four zero frets of different sizes are included in the banjo kit--you try the smallest and work your way up until you have no open string buzz. Use medium viscosity cyanoacrylate (available from Stewmac) so you have time to set the nut and fret properly. I'm pleased with the results, improved tone, and hammer-ons and pull-offs are more defined.
I have 3 instruments with a Zero Glide nut that I play regularly on shows and in jam sessions. My Gold Tone OB 150 has one as standard equipment from Gold Tone. Next is my Martin D custom Acoustic and next is my Washburn M3SWK F body mandolin. I did the install on those last 2 instruments. YES, you WILL have to do some fitting. Follow the instructions to the letter on this. YES, you may find it to be a pain but the gain is more than worth it. Once the Zero Glide is installed and once you start playing a few tunes, you will wonder why you have not installed a Zero Glide nut a lot sooner.
No more string binding issues, no more graphite in the slots or any grease either. You don't need that stuff anymore. No need for nut slot files either with a Zero Glide unless you get one un-slotted. You will still have to fit the Zero Glide nut so you can make it a part of your instrument. No getting around that. It is all part of the fun so enjoy the pain and take your time with the fitting. Once that is done, the action at the first fret will be perfect. Your tone will be better. You will get some sustain you haven't had before. The Zero Glide nut should be the ONLY nut to go on your instruments. I like what it does for playability and tone.
Just put one of these on an old beater of a cheap strat-clone kit that I use to experiment with "creative" wiring. Suddenly its in tune up and down the neck and stays that way after using the trem as well. It cost half the price of the kit but it has significantly improved the value of the instrument to me. It required a little sanding of the back of the nut but nothing drastic. I dont have many dedicated luthier tools so the fret wire is not trimmed perfectly (but the look is in keeping with the overall "relic'd" appearance of the guitar). The question now becomes can I get a discount if I order these in bulk?
