Speak with an Instrument Expert during business hours!
Business Hours:
Mon-Fri: 8:30am - 5:00pm
Sat-Sun: Closed
You Call, We Answer!
Chat with a real person
Email us directly
More Information
1-800-826-5482
contact@goldtone.com
Live Chat
Find A Dealer
Return Policy
Warranty Registration
Return Authorization (RA)
The Zero Glide Replacement Nut System borrows the "zero fret" concept to reduce string contact in the nut by up to 93%, increasing tuning stability, playability, and open string tone. It only takes a few minutes to install with absolutely no permanent alteration to your instrument. For Ukulele.
Also available in Black Delrin.
i HAVE ONE O TFHE NICER IMPORT JOHNSON ACOUSTIC ELECTRIC CUTAWAY GUITARS . SOLID SPRUCE TOP. INDIAN ROSEWOOD BACK AND SIDES. SOMETIME BACK I WAS ADJUSTING THE TRUSS ROD AND THE END BROKE OFF. LUCKILY THE ACTION WASN'T TERRIBLE. THE REAL PROBLEM I WAS HAVING WAS WHEN I PLAYED AT CHURCH I SWITCH BACK AND FORTH FROM CAPO TO NO CAPO DEPENDING ON THE SONG CHOSEN. WHEN I TUNED MY GUITAR STANDARD IT WAS FINE AND SOUNDED PRETTY GOOD BUT WHEN I USED THE CAPO THE GUITAR WOULD BE SLIGHTLY OUT OF TUNE. i JUST HAPPENED ACROSS TE ZERO GLIDE AND FIGURED I HAD NOTHING TO LOSE SINCE I COULD RETURN THE NUT BACK TO ORIGINAL WITH NO PROBLEM. I GOT THE CORRECT NUT BY USING THE STRING GUIDE PRINT OUT. TOOK MY TIME FOLLOWED VIDEO INSTRUCTIONS AND MADE MINOR ADJUSTMENTS UNTIL I WAS DONE. I CANNOT TELL YOU HOW PLEASED I AM. NO MORE OUT OF TUNE WITH CAPO. CONSISTENT BRIGHTER SOUND AND MUCH BETTER ACTION. I WOULD RECOMMEND THIS PRODUCT TO ANYONE I AM EVEN THINKING OF PUTTING ONE ON MY 1963 GIBSON LG1 SINCE THERE IS NO PERMANENT CHANGE TO THE GUITAR. THANKS ZERO GLIDE
I installed this on an old Alvarez acoustic that used to belong to my Dad. The strings had started to buzz badly and the bridge height was maxed out so I knew it must be the nut. Took about an hour to cut down the new nut and shape with the Drexel tool; sided/polished the frets and installed glide nut with the tallest feet wire. Worked like a charm and no more buzzing. Even lowed the bridge down to a reasonable height as well. Great product and easy to install.
My third build and first time I used the zero fret, made filing the nut slots easier. The sound is markedly clearer than the other bone nuts I've used.
Resolves the nut-string height issue with a simple and easy installation. Worked perfect on my Heritage 16.
I bought two of these, one Gibson-style and one Fender-style for two of my favorite project guitars, an Epiphone LPX and my Jazz-O-Caster parts guitar. The Gibson was a near drop-in, needing only some trimming and shaping for a perfect fit. The Fender was slightly more challenging, as the neck on the Jazz-O-Caster never saw the inside of any Fender-approved factory! It required a 1/32" shim underneath for a proper fit, and some sanding to make room for the tang. There was a marked increase in the brightness of tone for both instruments, as well as improved intonation. This is MUCH easier than installing a traditional nut, and nearly foolproof IF you follow the instructions. Thanks, Stewart-Macdonald, for stocking such a well-engineered product.
