ZS-26F Slotted for Basses (Common on Fender Jazz Bass)

A Zero Glide should be the ONLY to go on your instrument.

May 3, 2018

I have 3 instruments with a Zero Glide nut that I play regularly on shows and in jam sessions. My Gold Tone OB 150 has one as standard equipment from Gold Tone. Next is my Martin D custom Acoustic and next is my Washburn M3SWK F body mandolin. I did the install on those last 2 instruments. YES, you WILL have to do some fitting. Follow the instructions to the letter on this. YES, you may find it to be a pain but the gain is more than worth it. Once the Zero Glide is installed and once you start playing a few tunes, you will wonder why you have not installed a Zero Glide nut a lot sooner.

No more string binding issues, no more graphite in the slots or any grease either. You don't need that stuff anymore. No need for nut slot files either with a Zero Glide unless you get one un-slotted. You will still have to fit the Zero Glide nut so you can make it a part of your instrument. No getting around that. It is all part of the fun so enjoy the pain and take your time with the fitting. Once that is done, the action at the first fret will be perfect. Your tone will be better. You will get some sustain you haven't had before. The Zero Glide nut should be the ONLY nut to go on your instruments. I like what it does for playability and tone.

Raymond from

Get Rid Of The Gibson *Tink*

Mar 15, 2016

I just installed a Zero Glide Nut on my '14 Les Paul Studio. I was having trouble with the traditional *tink* and tuning issues often associated with Gibsons. Initially, I was going to try the new titanium nut made by Gibson but was told that it would not fit my '14 Les Paul. Keep in mind, I have never installed a nut before on a guitar where I needed to remove the old one. I had only fixed broken nuts in the past. I say this because I had a little anxiety when I decided to install the nut myself. The first thing I noticed was how much extra material must be sanded to get a perfect fit. For my application, I had to sand the bottom of the nut as well to get the fret to seat properly against the fret board. This may sound bad, but it is a good thing! It means that the folks at Stew-Mac realize (as I hope you do) that although these are precision instruments, there are many parts that are finished out by hand. The extra material allows for those minor variations and with a little work,

Marc Fletcher from

Single best upgrade I ve ever done

Jan 11, 2025

Replaced a stock plastic nut on my Squier Jaguar short scale bass with a zero glide today. Hand down the best upgrade I ve done to that or any instrument since I ve started playing. Action is now perfect intonation is spot on tuning is even better/easier as there is less friction to deal with. My initial reasoning for this upgrade was to minimize any nut work needed when changing string gauges now I just have to set intonation and tuning and it s good to go I didn t expect the immense open string clarity change nor did I expect that this bass could get any more sustain out of it but I stand corrected I ll be upgrading every bass and guitar I own to a zero glide now If you re on the fence just go for it - you won t be disappointed

Craig Miller

IT WORKS!

May 9, 2018

I put one on my Taylor 12 fret, it made a big improvement in string tone, tuning, and intonation. I'm now going to install them on all my guitars.

Dave Braun from