Replacement Frets - Straight (Pack of 3)

$9.99

Height

These replacement frets are specially designed with an offset tang for our Zero Glide nut system. Comes in a pack of 3.

Available in Low (.035"), Medium (.039"), High (.043"), Jumbo (.051"), Super Jumbo (.057").

See sizing guide for correct fit.

    Reviews

    Zero Glide on My Old SG

    Feb 22, 2017

    I had a Zero Glide Zero Fret Nut installed on my 68 Epiphone SG Clone by the luthier who does ALL of my guitar work Scott Thompson at String Craft - here in Memphis . 1st off I have to say that this guitar is one of my go-to guitars the others being my 1964 handmade Mosrite Celebrity Prototype and an early 80 s Mexican Telecaster. Upon getting my guitar back with the new Zero Glide installed I plugged it into my 65 Blackface Deluxe Reverb with a JBL D120f and I was IMMEDIATELY blow away by the improvement in the TONE of this guitar... It was pretty good before BUT now it is piano like ... The tone blew me away not to mention the improvement in ACTION... You see I am a BIG proponent of Zero Frets due to my Mosrite which is the standard by which I judge all others but I was not ready for the massive improvement that was realized by the installation of the Zero Glide Zero Fret Nut on this guitar. I have used this guitar now on a couple of gigs and am STILL blown away. OH tun

    Dr. Bill Hudson
    An Excellent Product!

    Apr 30, 2016

    I bought two of these, one Gibson-style and one Fender-style for two of my favorite project guitars, an Epiphone LPX and my Jazz-O-Caster parts guitar. The Gibson was a near drop-in, needing only some trimming and shaping for a perfect fit. The Fender was slightly more challenging, as the neck on the Jazz-O-Caster never saw the inside of any Fender-approved factory! It required a 1/32" shim underneath for a proper fit, and some sanding to make room for the tang. There was a marked increase in the brightness of tone for both instruments, as well as improved intonation. This is MUCH easier than installing a traditional nut, and nearly foolproof IF you follow the instructions. Thanks, Stewart-Macdonald, for stocking such a well-engineered product.

    John from Review pulled from Stew Macs Zero Glide Product Page
    Single best upgrade I ve ever done

    Jan 11, 2025
    Replaced a stock plastic nut on my Squier Jaguar short scale bass with a zero glide today. Hand down the best upgrade I ve done to that or any instrument since I ve started playing. Action is now perfect intonation is spot on tuning is even better/easier as there is less friction to deal with. My initial reasoning for this upgrade was to minimize any nut work needed when changing string gauges now I just have to set intonation and tuning and it s good to go I didn t expect the immense open string clarity change nor did I expect that this bass could get any more sustain out of it but I stand corrected I ll be upgrading every bass and guitar I own to a zero glide now If you re on the fence just go for it - you won t be disappointed
    Craig Miller Review pulled from Stew Macs Zero Glide Product Page
    Install On Fender And Classic Nylon Guitar

    Nov 9, 2016

    I installed this on a fender for my friend, he loves it.s like using a capo I recent bought a 12 string zero fret and installed it on my Kirk Sands classic nylon and It truly makes a difference in tuning. No slip and holds well. William clamp

    William from Review pulled from Stew Macs Zero Glide Product Page
    Excellent product // outstanding company // amazing customer service

    Jul 20, 2021
    I just purchased my 3rd zero glide nut. I have one on my acoustic guitar and this is my second on my 5 string banjo. I've had a couple of custom necks built by different luthiers and in each case I went with the zero glide nut in place of a traditional bone nut. I am a believer in all the technical advantages that the zero glide has to offer. On top of being a great product the family and staff at Gold Tone Banjos are simply amazing folks. I've experienced genuine and personal assistance from everyone that I've been in contact with in the company. This goes all the way from the owner and his wife to their children and techs in the shop. After placing my 3rd order online last night I received a call first thing this morning from Justin wanting to make sure that I understood exactly how the nut slots were cut at the factory on the ZS 8 pre-slotted nuts. Justin made sure that I was 100 satisfied. The new nut was finished this morning and shipped same day. If I could give this review a 10-star review I would. Point being is that this is a top-notch company with great personal and corporate values. I give them and their products the highest review and praise possible. Most definitely recommended.
    Steve Dyrda - Acworth GA Review pulled from Stew Macs Zero Glide Product Page

    X