Replacement Frets - Straight (Pack of 3)

$9.99

Height

These replacement frets are specially designed with an offset tang for our Zero Glide nut system. Comes in a pack of 3.

Available in Low (.035"), Medium (.039"), High (.043"), Jumbo (.051"), Super Jumbo (.057").

See sizing guide for correct fit.

    Reviews

    Get Rid Of The Gibson *Tink*

    Mar 15, 2016

    I just installed a Zero Glide Nut on my '14 Les Paul Studio. I was having trouble with the traditional *tink* and tuning issues often associated with Gibsons. Initially, I was going to try the new titanium nut made by Gibson but was told that it would not fit my '14 Les Paul. Keep in mind, I have never installed a nut before on a guitar where I needed to remove the old one. I had only fixed broken nuts in the past. I say this because I had a little anxiety when I decided to install the nut myself. The first thing I noticed was how much extra material must be sanded to get a perfect fit. For my application, I had to sand the bottom of the nut as well to get the fret to seat properly against the fret board. This may sound bad, but it is a good thing! It means that the folks at Stew-Mac realize (as I hope you do) that although these are precision instruments, there are many parts that are finished out by hand. The extra material allows for those minor variations and with a little work,

    Marc Fletcher from Review pulled from Stew Macs Zero Glide Product Page
    Zero Fret for Hofner Ignition bass

    Nov 3, 2023
    This is a great upgrade not just for replacing the nut but adding the zero fret gives some tone clarity on the open strings . Easy install no issues glad I did it .
    S.Bravo Review pulled from Stew Macs Zero Glide Product Page
    IT WORKS!

    May 9, 2018

    I put one on my Taylor 12 fret, it made a big improvement in string tone, tuning, and intonation. I'm now going to install them on all my guitars.

    Dave Braun from Review pulled from Stew Macs Zero Glide Product Page
    Great product!!!

    Oct 18, 2020

    Easy to install. I'll use it on all my new builds.

    Lewis Parker from Review pulled from Stew Macs Zero Glide Product Page
    Easy install with fantastic results

    Sep 16, 2020

    I have a Yamaha F310 and the nut was cut real high. Looking around on the internet I came across the ZerO Glide and decided to give it a try. It was less expensive that having the nut cut or purchasing the tools to do it. Printed out the sizing chart and found the ZS-5 had the correct spacing. In less than an hour my guitar felt and sounded great. This is one hell of a product and glad I made the purchase.

    Charles Oerter from Review pulled from Stew Macs Zero Glide Product Page

    X