ZB-13 Unslotted Replacement Nut for Classical Guitars

An inexperienced guitar tech worked on the nut of my Guild M75 Aristocrat electric and I ended up with a "sitar" sound on my high E string and a dead G string and bad intonation. A friend recommended Zero Glide and that company recommended this particular nut.

Installation was not particularly difficult for a handy guy, but took two hours and involved sanding nearly 1/8 inch off the bottom of the new nut and 1/16th plus off each side while being careful to keep it even. The video on the company website helps. Once fitted correctly you decide how big of a 'zero fret' you want. There are four of different sizes in the package. I tried them all and found that the smaller ones provide very low action at the nut (which is nice), but require a higher action up the neck to clear the first fret where the strings can rattle. I ended up using the largest fret provided as it allowed me low action where I need it. Once you have it figured out you trim the zero fret to length and glue it

I just put the Zero Glide on my guitar. Very impressed. This is as close to perfect as I can get. I can bend all over the guitar and 95 of the time the notes come back to the original pitch....the few times they don t it s so minimal most people wouldn t notice it....I really believe that it s probably the tuners....they re decent low grade tuners. Nothing special. Amazing considering this is a 300.00 guitar. I checked the space between the 1st fret and the E and B strings fretted at the third fret...distance between 1st fret and bottom of string .....they looked like they were less than a thousandth and the guitar was not buzzing on an open string. The action is very low with extra thin strings on it. This made the guitar play even easier. I had the strings set at about 4 thousandths from the first fret while fretting at the third. This took them lower....especially on the first 5 frets. Good job on this I do wish they would have sent me a smaller fret.

I have 3 instruments with a Zero Glide nut that I play regularly on shows and in jam sessions. My Gold Tone OB 150 has one as standard equipment from Gold Tone. Next is my Martin D custom Acoustic and next is my Washburn M3SWK F body mandolin. I did the install on those last 2 instruments. YES, you WILL have to do some fitting. Follow the instructions to the letter on this. YES, you may find it to be a pain but the gain is more than worth it. Once the Zero Glide is installed and once you start playing a few tunes, you will wonder why you have not installed a Zero Glide nut a lot sooner.

No more string binding issues, no more graphite in the slots or any grease either. You don't need that stuff anymore. No need for nut slot files either with a Zero Glide unless you get one un-slotted. You will still have to fit the Zero Glide nut so you can make it a part of your instrument. No getting around that. It is all part of the fun so enjoy the pain and take your time with the fitting. Once that is done, the action at the first fret will be perfect. Your tone will be better. You will get some sustain you haven't had before. The Zero Glide nut should be the ONLY nut to go on your instruments. I like what it does for playability and tone.