ZB-25 Unslotted Replacement Nut for Resonator Guitars

I purchased a '97 Squier Vista MusicMaster Bass locally. The stock plastic nut needed replacing or filing. I had already pulled the nut off of the MusicMaster and had all measurements noted before replacing the stock nut temporarily. The Zero Glide ZS-17F Precision Bass Precision Bass model specs matched up with the MusicMaster specs. Cool. After my Zero Glide arrived I pulled the stock nut and lightly sanded the nut slot on the fretboard with fine sandpaper to remove any debris or adhesive residue used on the stock nut. Next I slid the Zero Glide nut onto the fretboard. Nice snug fit. The width of the Zero Glide was perfect. My next step was to make sure that the top / flat surface of the nut was flush with the fretboard. This is crucial to allowing the fret to seat correctly on both the fretboard and the zero fret nut. On my MusicMaster this required a very thin shim under the Zero Glide nut. Once the nut was seated properly it was just a matter of selecting which of the fret sizes provided is required for the instrument. In my case this was the longest installation step time-wise. Once you have selected the proper fret, mark the fret and cut with the proper tool. Examine the cut end of the and correct any imperfections due to cutting on the tang of the fret by filing. A small bench top vise with padded jaws and high quality file makes this step a snap. Installation time in my case : - shimming me the nut, less than 10 minutes - selecting the correct fret size, 45 minutes - all filing on the fret ends and top corners of the nut, less than 15 minutes I'm very pleased with the results. The open string notes sound like fretted notes of course, and I was able to achieve noticeably lower action without fret buzz after a setup. I'm especially pleased with the improved note definition of the open E and A strings. I did not check the intonation with the stock nut on the 1st five or so frets before I installed the Zero Glide, but the intonation is fine on the lower frets. My order was processed and shipped promptly and Gold Tone customer service is excellent. Thanks for a great product !

I wrote another review about Zero Glide and my Gold Tone OB 150 banjo. As many already know the Zero Glide Nut is standard equipment on the OB 150 banjo. Gold Tone has this nut on other instruments too. I like this nut system for a lot of reasons. I installed a Zero Glide nut on my Martin D custom and I even installed a Zero Glide on my Washburn M3SWK F body mandolin. Those stock plastic nuts on many of the entry level pro instruments just does not cut it. You are cheating yourself and your audience out of a lot of tone and sweetness that ears should be hearing. The Zero Glide nut does a world of wonders for my instruments. Do yourself a favor and get one on your axe. You may love it. I know I do. I am addicted to Zero Glide.

I m impressed with this. Easy to install. I m not a luthiar but I have refretted a few guitars and made some nuts and saddles. This is a pretty incredible system. I was going to cut a new nut for an acoustic guitar I just bought. I tested it and it was not sliding perfectly through the nut even though there was no ping while tuning. The way I test a nut is to strike a note then smack the string between the nut and the machine heads. behind the nut I put a tuner on the head stock so I can watch the note go up and come back. It simulates a good bend and you can watch the quality of the nut you have on the guitar. Most guitars will stick at about 6 to 10 cents above the tuned note unless you have a really well cut nut. At least the wound strings will....steel strings will usually drop back to the tuned note if the nut is decent . The nut I had on this guitar was pretty good....no pings while tuning yet it would still catch occasionally which effected tuning.

I put one on my Taylor 12 fret, it made a big improvement in string tone, tuning, and intonation. I'm now going to install them on all my guitars.