ZB-27F Unslotted Replacement Nut for Basses (Common on Fender P-Bass)

$39.99

Material

Slots

The Zero Glide Replacement Nut System borrows the "zero fret" concept to reduce string contact in the nut by up to 93%, increasing tuning stability, playability, and open string tone. It only takes a few minutes to install with absolutely no permanent alteration to your instrument. For Fender Style "P-Bass".

Also available in Black Delrin.

Note: May not fit specific models. Check the sizing guide to be sure.

Free 2-Day Shipping (Continental US Only)
See sizing guide for correct fit.
  • Length: 42mm (1-21/32")
  • Radius: 9.5"
  • Production Height: 5.5mm (7/32")
  • End Height: Bass:5.4mm (7/32") Treble:3.7 (9/64")
  • Fingerboard: 2.7mm (7/64")
  • Thickness: 2.5mm (3/16")
  • Fret Sizes: L, M, H, J (.035", .039", .043", .051")
  • String Spacing: 31.75mm (1-1/4")
  • String Gauges: .107", .083", .067", .047"

Reviews

Great Product!!!

Nov 16, 2016

I've owned guitars with zero frets and always wondered why the idea never really caught on...For me,It improves the feel,tuning stability and playability..I was interested when I saw this device and wondered if it was something I would be capable of installing without risk to my acoustic... it turned out to be easier than I'd hoped..with just a small amount of sanding I had it installed in less than an hour...I'll be ordering at least one more to try out on one of my electrics..thanks Bob M.

Robert from Review pulled from Stew Macs Zero Glide Product Page
The Offset Tang On The Fret Is The Key

Oct 15, 2016

I bought the mandolin version and fitted it to my Gibson. There's a lot of extra material to remove, but the result was great. Easier tuning (the old nut had tight slots for the A strings), better intonation. Later I used one of the extra frets in the package to fix a tenor guitar. For that, I simply filed the necessary ledges in the existing nut and widened the string slots. It would be nice if Stew-Mac would also sell the offset tang frets separately, for retrofitting to an existing nut.

Ross from Review pulled from Stew Macs Zero Glide Product Page
I nutted

Aug 28, 2022
I bought one for my generic mass produced bass don't get me wrong It's an awesome bass . I recently had It refretted with jumbo gold bell brass frets and It's regular plastic nut started to feel off. I did a little search on web and came upto this products. I combined It with my leftover gold fret wire and boom I Nutted Finally after years of trying to prevent using open strings on my bass I can enjoy that low open string notes sustaining to eternity. 100 recommended and If you ever get a custom made instrument insist on the 0 fret option. You can try different gauge strings without worrying about nut slot shapes and widths.
Wesley Warren Jr. Review pulled from Stew Macs Zero Glide Product Page
IT WORKS!

May 9, 2018

I put one on my Taylor 12 fret, it made a big improvement in string tone, tuning, and intonation. I'm now going to install them on all my guitars.

Dave Braun from Review pulled from Stew Macs Zero Glide Product Page
Gibson AJ

Mar 4, 2017

Had tuning stability and buzzing issues after ten years on my first bone nut. Also have always been bothered by open string vs. fretted string sounds. I play mostly flat picking/crosspicking styles and Travis style picking. The consistency of the note makes both more enjoyable for me. No buzzing lower action smoother tuning smoother playing easier bending etc... Have all been a result. Took me about two hours to get height and width of nut and fret correct. Had to get a smaller get shipped from gold tone and their customer service was the easiest I have ever experienced. Had part in two days and I am satisfied.

Jeremy A Wiggins Review pulled from Stew Macs Zero Glide Product Page

X