Speak with an Instrument Expert during business hours!
Business Hours:
Mon-Fri: 8:30am - 5:00pm
Sat-Sun: Closed
You Call, We Answer!
Chat with a real person
Email us directly
More Information
1-800-826-5482
contact@goldtone.com
Live Chat
Find A Dealer
Return Policy
Warranty Registration
Return Authorization (RA)
The Zero Glide Replacement Nut System borrows the "zero fret" concept to reduce string contact in the nut by up to 93%, increasing tuning stability, playability, and open string tone. It only takes a few minutes to install with absolutely no permanent alteration to your instrument. For Martin & Taylor Style Guitar (Blank).
Also available in Black Delrin.
I just installed a Zero Glide Nut on my '14 Les Paul Studio. I was having trouble with the traditional *tink* and tuning issues often associated with Gibsons. Initially, I was going to try the new titanium nut made by Gibson but was told that it would not fit my '14 Les Paul. Keep in mind, I have never installed a nut before on a guitar where I needed to remove the old one. I had only fixed broken nuts in the past. I say this because I had a little anxiety when I decided to install the nut myself. The first thing I noticed was how much extra material must be sanded to get a perfect fit. For my application, I had to sand the bottom of the nut as well to get the fret to seat properly against the fret board. This may sound bad, but it is a good thing! It means that the folks at Stew-Mac realize (as I hope you do) that although these are precision instruments, there are many parts that are finished out by hand. The extra material allows for those minor variations and with a little work,
My circa 1997 American Standard Strat always had a problem with staying in tune after whammy bar use. I tried pencil graphite and different string sizes with not much luck. I put this nut on and a set of Gotoh locking tuners and now it seems to stay in tune very well.
My third build and first time I used the zero fret, made filing the nut slots easier. The sound is markedly clearer than the other bone nuts I've used.
One for Fender Telecaster, the other for Breedlove acoustic. Both of these guitars are top 10 instruments. The Zero Glide nut improvement came through as described on Youtube demos. So much better string action (lower with out any fret buzz) Clarity in open string tone chords and pulloff plucking, faster tuning to pitch, using electronic tuner, remaining in pitch once strings stretch has settled in. I took my time to install on both guitars about 2 hours for each instrument. Have new custom Guitar that I will 99% sure I will add this improvement to soon. I see this becoming a standard upgrade to many popular manufactures. Lastly the sustain in open chords on all strings cant be described.
I just put the Zero Glide on my guitar. Very impressed. This is as close to perfect as I can get. I can bend all over the guitar and 95 of the time the notes come back to the original pitch....the few times they don t it s so minimal most people wouldn t notice it....I really believe that it s probably the tuners....they re decent low grade tuners. Nothing special. Amazing considering this is a 300.00 guitar. I checked the space between the 1st fret and the E and B strings fretted at the third fret...distance between 1st fret and bottom of string .....they looked like they were less than a thousandth and the guitar was not buzzing on an open string. The action is very low with extra thin strings on it. This made the guitar play even easier. I had the strings set at about 4 thousandths from the first fret while fretting at the third. This took them lower....especially on the first 5 frets. Good job on this I do wish they would have sent me a smaller fret.
$39.99
