ZS-10 Slotted Replacement Nut for Mandolins

Zero Glide on My Old SG

Feb 22, 2017

I had a Zero Glide Zero Fret Nut installed on my 68 Epiphone SG Clone by the luthier who does ALL of my guitar work Scott Thompson at String Craft - here in Memphis . 1st off I have to say that this guitar is one of my go-to guitars the others being my 1964 handmade Mosrite Celebrity Prototype and an early 80 s Mexican Telecaster. Upon getting my guitar back with the new Zero Glide installed I plugged it into my 65 Blackface Deluxe Reverb with a JBL D120f and I was IMMEDIATELY blow away by the improvement in the TONE of this guitar... It was pretty good before BUT now it is piano like ... The tone blew me away not to mention the improvement in ACTION... You see I am a BIG proponent of Zero Frets due to my Mosrite which is the standard by which I judge all others but I was not ready for the massive improvement that was realized by the installation of the Zero Glide Zero Fret Nut on this guitar. I have used this guitar now on a couple of gigs and am STILL blown away. OH tun

Dr. Bill Hudson

Zero Glide Nut

Oct 7, 2016

I've got a '67 Gretsch Country Gentleman that has what they called the zero fret. I had always wondered why didn't anybody else do this. I put this on my 2010 Gibson Lucille and it solved the nut drag problem. I'm also going to put it on my '76 Les Paul Deluxe. A great solution to an on going problem.

Mickey from

YES there is a Zero Glide nut for a square neck resonator.

Jul 16, 2021

Do you play a square neck Dobro You know that resonator guitar that is used in bluegrass music Then get a Zero Glide for that instrument. YES it works. I have a Gold Tone OB150 5 string banjo where I was introduced to the ZERO GLIDE nut system. This started a long time love affair with this fine invention. I installed one on a mandolin my Martin D custom that is my number 1 guitar I have one on one of my Telecasters and the rest will soon get them. If it has a nut then it needs a ZERO GLIDE nut. This is very easy to install you can even do the sanding to fit it with a Stew Mac tool that you use to sand nuts and saddles so you will be sure to get a perfectly flat surface for best results. Follow the instructions and you will be able to install the ZERO GLIDE nut even if you are not an experienced Luthier. You can improve tone on a entry level square neck resonator guitar like my Morgan Monroe and any other fretted instrument you install the ZERO GLIDE nut system. You can replace the cone and the spider bridge and the saddles with all the Beard goodies you can get to make your Dobro shine tone wise but DO NOT FORGET the ZERO GLIDE nut system. The one mod that will save you from a world of pain. You will not have to buy a very expensive set of nut files to install and set up a ZERO GLIDE nut system because it is not required unless you get one without slots for a custom job. The nut is bone and the fret wire is metal sometimes stainless steel so you are actually adding to your tone and you take away the usual nut issues with a Zero Glide. Everything I put a ZERO GLIDE nut system on plays much better and sounds much better too. YES there is a ZERO GLIDE nut for your Dobro and just about everything else. Need something custom ZERO GLIDE can help with custom nuts.

Ray Lawrence Jr

Excellent product // outstanding company // amazing customer service

Jul 20, 2021

I just purchased my 3rd zero glide nut. I have one on my acoustic guitar and this is my second on my 5 string banjo. I've had a couple of custom necks built by different luthiers and in each case I went with the zero glide nut in place of a traditional bone nut. I am a believer in all the technical advantages that the zero glide has to offer. On top of being a great product the family and staff at Gold Tone Banjos are simply amazing folks. I've experienced genuine and personal assistance from everyone that I've been in contact with in the company. This goes all the way from the owner and his wife to their children and techs in the shop. After placing my 3rd order online last night I received a call first thing this morning from Justin wanting to make sure that I understood exactly how the nut slots were cut at the factory on the ZS 8 pre-slotted nuts. Justin made sure that I was 100 satisfied. The new nut was finished this morning and shipped same day. If I could give this review a 10-star review I would. Point being is that this is a top-notch company with great personal and corporate values. I give them and their products the highest review and praise possible. Most definitely recommended.

Steve Dyrda - Acworth GA