ZS-10 Slotted Replacement Nut for Mandolins

I bought a Gold Tone OB 150 Masterclone banjo that is equipped with a Zero Glide nut. This nut is amazing. YES it will help with tone. No more string binding with Zero Glide. Ever notice on a new instrument how when you are tuning up and on occasion you hear a sound like a string is catching in the slot You will not have that issue with Zero Glide. Once you actually play an instrument with a Zero Glide nut you will notice some differences. You may want to outfit all of your stringed instruments to Zero Glide. No need for slot files to set the action at the nut side of the neck. No more smoothing out string slots with high dollar files that snap really easy. No more using graphite or grease on the nut. Zero Glide takes care of that. Might be the first healthy choice for a nut for your instrument. Get one and install it. You will love it.

I had a Zero Glide Zero Fret Nut installed on my 68 Epiphone SG Clone by the luthier who does ALL of my guitar work Scott Thompson at String Craft - here in Memphis . 1st off I have to say that this guitar is one of my go-to guitars the others being my 1964 handmade Mosrite Celebrity Prototype and an early 80 s Mexican Telecaster. Upon getting my guitar back with the new Zero Glide installed I plugged it into my 65 Blackface Deluxe Reverb with a JBL D120f and I was IMMEDIATELY blow away by the improvement in the TONE of this guitar... It was pretty good before BUT now it is piano like ... The tone blew me away not to mention the improvement in ACTION... You see I am a BIG proponent of Zero Frets due to my Mosrite which is the standard by which I judge all others but I was not ready for the massive improvement that was realized by the installation of the Zero Glide Zero Fret Nut on this guitar. I have used this guitar now on a couple of gigs and am STILL blown away. OH tun

This is one of those things that you ask yourself why has no one thought of this before, but it likely would have been very difficult to produce on a volume scale without CNC machines.......I put the ZB4 on a Washburn parlor guitar and was amazed at the difference in tone clarity, sustain and definition as well as tuning stability and the lowest possible action.........What more could you ask for for one single mod??.....Zero Glide makes several different sizes etc to fit just about any guitar, so be sure you get the right model for your instrument. The unslotted ZB4 requires slotting, so it does require some skill and proper files. I would recommend letting a tech install if you have no experience or tools. I do predict that some of the major instrument makers will be using this in the near future. Why did'nt I think of this. JB/Texas

An inexperienced guitar tech worked on the nut of my Guild M75 Aristocrat electric and I ended up with a "sitar" sound on my high E string and a dead G string and bad intonation. A friend recommended Zero Glide and that company recommended this particular nut.

Installation was not particularly difficult for a handy guy, but took two hours and involved sanding nearly 1/8 inch off the bottom of the new nut and 1/16th plus off each side while being careful to keep it even. The video on the company website helps. Once fitted correctly you decide how big of a 'zero fret' you want. There are four of different sizes in the package. I tried them all and found that the smaller ones provide very low action at the nut (which is nice), but require a higher action up the neck to clear the first fret where the strings can rattle. I ended up using the largest fret provided as it allowed me low action where I need it. Once you have it figured out you trim the zero fret to length and glue it