ZS-10 Slotted Replacement Nut for Mandolins

I have 3 instruments with a Zero Glide nut that I play regularly on shows and in jam sessions. My Gold Tone OB 150 has one as standard equipment from Gold Tone. Next is my Martin D custom Acoustic and next is my Washburn M3SWK F body mandolin. I did the install on those last 2 instruments. YES, you WILL have to do some fitting. Follow the instructions to the letter on this. YES, you may find it to be a pain but the gain is more than worth it. Once the Zero Glide is installed and once you start playing a few tunes, you will wonder why you have not installed a Zero Glide nut a lot sooner.

No more string binding issues, no more graphite in the slots or any grease either. You don't need that stuff anymore. No need for nut slot files either with a Zero Glide unless you get one un-slotted. You will still have to fit the Zero Glide nut so you can make it a part of your instrument. No getting around that. It is all part of the fun so enjoy the pain and take your time with the fitting. Once that is done, the action at the first fret will be perfect. Your tone will be better. You will get some sustain you haven't had before. The Zero Glide nut should be the ONLY nut to go on your instruments. I like what it does for playability and tone.

i HAVE ONE O TFHE NICER IMPORT JOHNSON ACOUSTIC ELECTRIC CUTAWAY GUITARS . SOLID SPRUCE TOP. INDIAN ROSEWOOD BACK AND SIDES. SOMETIME BACK I WAS ADJUSTING THE TRUSS ROD AND THE END BROKE OFF. LUCKILY THE ACTION WASN'T TERRIBLE. THE REAL PROBLEM I WAS HAVING WAS WHEN I PLAYED AT CHURCH I SWITCH BACK AND FORTH FROM CAPO TO NO CAPO DEPENDING ON THE SONG CHOSEN. WHEN I TUNED MY GUITAR STANDARD IT WAS FINE AND SOUNDED PRETTY GOOD BUT WHEN I USED THE CAPO THE GUITAR WOULD BE SLIGHTLY OUT OF TUNE. i JUST HAPPENED ACROSS TE ZERO GLIDE AND FIGURED I HAD NOTHING TO LOSE SINCE I COULD RETURN THE NUT BACK TO ORIGINAL WITH NO PROBLEM. I GOT THE CORRECT NUT BY USING THE STRING GUIDE PRINT OUT. TOOK MY TIME FOLLOWED VIDEO INSTRUCTIONS AND MADE MINOR ADJUSTMENTS UNTIL I WAS DONE. I CANNOT TELL YOU HOW PLEASED I AM. NO MORE OUT OF TUNE WITH CAPO. CONSISTENT BRIGHTER SOUND AND MUCH BETTER ACTION. I WOULD RECOMMEND THIS PRODUCT TO ANYONE I AM EVEN THINKING OF PUTTING ONE ON MY 1963 GIBSON LG1 SINCE THERE IS NO PERMANENT CHANGE TO THE GUITAR. THANKS ZERO GLIDE

I just put the Zero Glide on my guitar. Very impressed. This is as close to perfect as I can get. I can bend all over the guitar and 95 of the time the notes come back to the original pitch....the few times they don t it s so minimal most people wouldn t notice it....I really believe that it s probably the tuners....they re decent low grade tuners. Nothing special. Amazing considering this is a 300.00 guitar. I checked the space between the 1st fret and the E and B strings fretted at the third fret...distance between 1st fret and bottom of string .....they looked like they were less than a thousandth and the guitar was not buzzing on an open string. The action is very low with extra thin strings on it. This made the guitar play even easier. I had the strings set at about 4 thousandths from the first fret while fretting at the third. This took them lower....especially on the first 5 frets. Good job on this I do wish they would have sent me a smaller fret.