ZS-17F Slotted Replacement Nut for Basses (Common on Fender P-Bass)

Install On Fender And Classic Nylon Guitar

Nov 9, 2016

I installed this on a fender for my friend, he loves it.s like using a capo I recent bought a 12 string zero fret and installed it on my Kirk Sands classic nylon and It truly makes a difference in tuning. No slip and holds well. William clamp

William from

Get Rid Of The Gibson *Tink*

Mar 15, 2016

I just installed a Zero Glide Nut on my '14 Les Paul Studio. I was having trouble with the traditional *tink* and tuning issues often associated with Gibsons. Initially, I was going to try the new titanium nut made by Gibson but was told that it would not fit my '14 Les Paul. Keep in mind, I have never installed a nut before on a guitar where I needed to remove the old one. I had only fixed broken nuts in the past. I say this because I had a little anxiety when I decided to install the nut myself. The first thing I noticed was how much extra material must be sanded to get a perfect fit. For my application, I had to sand the bottom of the nut as well to get the fret to seat properly against the fret board. This may sound bad, but it is a good thing! It means that the folks at Stew-Mac realize (as I hope you do) that although these are precision instruments, there are many parts that are finished out by hand. The extra material allows for those minor variations and with a little work,

Marc Fletcher from

Good stuff

May 15, 2017

I m impressed with this. Easy to install. I m not a luthiar but I have refretted a few guitars and made some nuts and saddles. This is a pretty incredible system. I was going to cut a new nut for an acoustic guitar I just bought. I tested it and it was not sliding perfectly through the nut even though there was no ping while tuning. The way I test a nut is to strike a note then smack the string between the nut and the machine heads. behind the nut I put a tuner on the head stock so I can watch the note go up and come back. It simulates a good bend and you can watch the quality of the nut you have on the guitar. Most guitars will stick at about 6 to 10 cents above the tuned note unless you have a really well cut nut. At least the wound strings will....steel strings will usually drop back to the tuned note if the nut is decent . The nut I had on this guitar was pretty good....no pings while tuning yet it would still catch occasionally which effected tuning.

David Kennedy

Excellent product // outstanding company // amazing customer service

Jul 20, 2021

I just purchased my 3rd zero glide nut. I have one on my acoustic guitar and this is my second on my 5 string banjo. I've had a couple of custom necks built by different luthiers and in each case I went with the zero glide nut in place of a traditional bone nut. I am a believer in all the technical advantages that the zero glide has to offer. On top of being a great product the family and staff at Gold Tone Banjos are simply amazing folks. I've experienced genuine and personal assistance from everyone that I've been in contact with in the company. This goes all the way from the owner and his wife to their children and techs in the shop. After placing my 3rd order online last night I received a call first thing this morning from Justin wanting to make sure that I understood exactly how the nut slots were cut at the factory on the ZS 8 pre-slotted nuts. Justin made sure that I was 100 satisfied. The new nut was finished this morning and shipped same day. If I could give this review a 10-star review I would. Point being is that this is a top-notch company with great personal and corporate values. I give them and their products the highest review and praise possible. Most definitely recommended.

Steve Dyrda - Acworth GA