ZS-17F Slotted Replacement Nut for Basses (Common on Fender P-Bass)

$39.99

Material

Slots

The Zero Glide Replacement Nut System borrows the "zero fret" concept to reduce string contact in the nut by up to 93%, increasing tuning stability, playability, and open string tone. It only takes a few minutes to install with absolutely no permanent alteration to your instrument. For Fender Style "P-Bass".

Also available in Black Delrin.

Note: May not fit specific models. Check the sizing guide to be sure.

Free 2-Day Shipping (Continental US Only)
See sizing guide for correct fit.
  • Length: 42mm (1-21/32")
  • Radius: 9.5"
  • Production Height: 5.5mm (7/32")
  • End Height: Bass:5.4mm (7/32") Treble:3.7 (9/64")
  • Fingerboard: 2.7mm (7/64")
  • Thickness: 2.5mm (3/16")
  • Fret Sizes: L, M, H, J (.035", .039", .043", .051")
  • String Spacing: 31.75mm (1-1/4")
  • String Gauges: .107", .083", .067", .047"
  • Special Notes: Larger String Gauges can be used, but slot will need to be widened (using a file or emoryboard)

Reviews

I nutted

Aug 28, 2022
I bought one for my generic mass produced bass don't get me wrong It's an awesome bass . I recently had It refretted with jumbo gold bell brass frets and It's regular plastic nut started to feel off. I did a little search on web and came upto this products. I combined It with my leftover gold fret wire and boom I Nutted Finally after years of trying to prevent using open strings on my bass I can enjoy that low open string notes sustaining to eternity. 100 recommended and If you ever get a custom made instrument insist on the 0 fret option. You can try different gauge strings without worrying about nut slot shapes and widths.
Wesley Warren Jr.
great nuts.

Jan 15, 2018

I put this on one guitar i built and promptly bought another for another guitar. Awesome product. Use them!

Craig from Review pulled from Stew Macs Zero Glide Product Page
Fixed my problem perfectly!!

Oct 18, 2020

I was having a very hard time finding the right nut replacement for my mandolin. Finally found this one at StewMac. Have never used the zero glide before, but this one works great. Had a good deal of sanding to do for a perfect fit, but it works great and sound is super on my mando. Thanks guys!!

Kenny Comeaux from Review pulled from Stew Macs Zero Glide Product Page
Nice Banjo Upgrade

Apr 18, 2016

The bone nut was easy to install. I sanded the length and depth with a table sander. The instructions are complete and easy to follow. Four zero frets of different sizes are included in the banjo kit--you try the smallest and work your way up until you have no open string buzz. Use medium viscosity cyanoacrylate (available from Stewmac) so you have time to set the nut and fret properly. I'm pleased with the results, improved tone, and hammer-ons and pull-offs are more defined.

Gregory Bell from Review pulled from Stew Macs Zero Glide Product Page
Zero Glide on My Old SG

Feb 22, 2017

I had a Zero Glide Zero Fret Nut installed on my 68 Epiphone SG Clone by the luthier who does ALL of my guitar work Scott Thompson at String Craft - here in Memphis . 1st off I have to say that this guitar is one of my go-to guitars the others being my 1964 handmade Mosrite Celebrity Prototype and an early 80 s Mexican Telecaster. Upon getting my guitar back with the new Zero Glide installed I plugged it into my 65 Blackface Deluxe Reverb with a JBL D120f and I was IMMEDIATELY blow away by the improvement in the TONE of this guitar... It was pretty good before BUT now it is piano like ... The tone blew me away not to mention the improvement in ACTION... You see I am a BIG proponent of Zero Frets due to my Mosrite which is the standard by which I judge all others but I was not ready for the massive improvement that was realized by the installation of the Zero Glide Zero Fret Nut on this guitar. I have used this guitar now on a couple of gigs and am STILL blown away. OH tun

Dr. Bill Hudson Review pulled from Stew Macs Zero Glide Product Page

X