ZS-17F Slotted Replacement Nut for Basses (Common on Fender P-Bass)

$39.99

Material

Slots

The Zero Glide Replacement Nut System borrows the "zero fret" concept to reduce string contact in the nut by up to 93%, increasing tuning stability, playability, and open string tone. It only takes a few minutes to install with absolutely no permanent alteration to your instrument. For Fender Style "P-Bass".

Also available in Black Delrin.

Note: May not fit specific models. Check the sizing guide to be sure.

Free 2-Day Shipping (Continental US Only)
See sizing guide for correct fit.
  • Length: 42mm (1-21/32")
  • Radius: 9.5"
  • Production Height: 5.5mm (7/32")
  • End Height: Bass:5.4mm (7/32") Treble:3.7 (9/64")
  • Fingerboard: 2.7mm (7/64")
  • Thickness: 2.5mm (3/16")
  • Fret Sizes: L, M, H, J (.035", .039", .043", .051")
  • String Spacing: 31.75mm (1-1/4")
  • String Gauges: .107", .083", .067", .047"
  • Special Notes: Larger String Gauges can be used, but slot will need to be widened (using a file or emoryboard)

Reviews

The Offset Tang On The Fret Is The Key

Oct 15, 2016

I bought the mandolin version and fitted it to my Gibson. There's a lot of extra material to remove, but the result was great. Easier tuning (the old nut had tight slots for the A strings), better intonation. Later I used one of the extra frets in the package to fix a tenor guitar. For that, I simply filed the necessary ledges in the existing nut and widened the string slots. It would be nice if Stew-Mac would also sell the offset tang frets separately, for retrofitting to an existing nut.

Ross from Review pulled from Stew Macs Zero Glide Product Page
Zero Fret for Hofner Ignition bass

Nov 3, 2023
This is a great upgrade not just for replacing the nut but adding the zero fret gives some tone clarity on the open strings . Easy install no issues glad I did it .
S.Bravo Review pulled from Stew Macs Zero Glide Product Page
Zero Glide Nut@ Livewerks Guitars

Oct 22, 2016

Installed in a vintage Japanese Custom Shop Fender Tele. Great low action and better tuning stability. Easy install as well. Thanks for a great product.

Michael from Review pulled from Stew Macs Zero Glide Product Page
Acoustic Glide Nut

Oct 7, 2016

I installed this on an old Alvarez acoustic that used to belong to my Dad. The strings had started to buzz badly and the bridge height was maxed out so I knew it must be the nut. Took about an hour to cut down the new nut and shape with the Drexel tool; sided/polished the frets and installed glide nut with the tallest feet wire. Worked like a charm and no more buzzing. Even lowed the bridge down to a reasonable height as well. Great product and easy to install.

Jan Scallan from Review pulled from Stew Macs Zero Glide Product Page
Great product

Dec 31, 2017

My circa 1997 American Standard Strat always had a problem with staying in tune after whammy bar use. I tried pencil graphite and different string sizes with not much luck. I put this nut on and a set of Gotoh locking tuners and now it seems to stay in tune very well.

Jeff from Review pulled from Stew Macs Zero Glide Product Page

X