ZS-18 Slotted Replacement Nut for Basses

$39.99

Material

Slots

The Zero Glide Replacement Nut System borrows the "zero fret" concept to reduce string contact in the nut by up to 93%, increasing tuning stability, playability, and open string tone. It only takes a few minutes to install with absolutely no permanent alteration to your instrument. For Bass.

Also available in Black Delrin.

Free 2-Day Shipping (Continental US Only)
See sizing guide for correct fit.
  • Length: 42.7" (1-11/16")
  • Radius: 12"
  • Production Height: 11.5mm (29/64")
  • End Height: Bass:11mm (7/16") Treble:9.8 (25/64")
  • Fingerboard: 8mm (5/16")
  • Thickness: 5.9mm (15/64")
  • Fret Sizes: L, M, H, J (.035", .039", .043", .051")
  • String Spacing: 33.0mm (1-19/64")
  • String Gauges: .107", .087", .067", .047"
  • Special Notes: Larger String Gauges can be used, but slot will need to be widened (using a file or emoryboard)

Reviews

great nuts.

Jan 15, 2018

I put this on one guitar i built and promptly bought another for another guitar. Awesome product. Use them!

Craig from Review pulled from Stew Macs Zero Glide Product Page
Single best upgrade I ve ever done

Jan 11, 2025
Replaced a stock plastic nut on my Squier Jaguar short scale bass with a zero glide today. Hand down the best upgrade I ve done to that or any instrument since I ve started playing. Action is now perfect intonation is spot on tuning is even better/easier as there is less friction to deal with. My initial reasoning for this upgrade was to minimize any nut work needed when changing string gauges now I just have to set intonation and tuning and it s good to go I didn t expect the immense open string clarity change nor did I expect that this bass could get any more sustain out of it but I stand corrected I ll be upgrading every bass and guitar I own to a zero glide now If you re on the fence just go for it - you won t be disappointed
Craig Miller Review pulled from Stew Macs Zero Glide Product Page
An Excellent Product!

Apr 30, 2016

I bought two of these, one Gibson-style and one Fender-style for two of my favorite project guitars, an Epiphone LPX and my Jazz-O-Caster parts guitar. The Gibson was a near drop-in, needing only some trimming and shaping for a perfect fit. The Fender was slightly more challenging, as the neck on the Jazz-O-Caster never saw the inside of any Fender-approved factory! It required a 1/32" shim underneath for a proper fit, and some sanding to make room for the tang. There was a marked increase in the brightness of tone for both instruments, as well as improved intonation. This is MUCH easier than installing a traditional nut, and nearly foolproof IF you follow the instructions. Thanks, Stewart-Macdonald, for stocking such a well-engineered product.

John from Review pulled from Stew Macs Zero Glide Product Page
I nutted

Aug 28, 2022
I bought one for my generic mass produced bass don't get me wrong It's an awesome bass . I recently had It refretted with jumbo gold bell brass frets and It's regular plastic nut started to feel off. I did a little search on web and came upto this products. I combined It with my leftover gold fret wire and boom I Nutted Finally after years of trying to prevent using open strings on my bass I can enjoy that low open string notes sustaining to eternity. 100 recommended and If you ever get a custom made instrument insist on the 0 fret option. You can try different gauge strings without worrying about nut slot shapes and widths.
Wesley Warren Jr. Review pulled from Stew Macs Zero Glide Product Page
zero glide nut

Jan 10, 2018

I play fingerstyle guitar. My favorite guitar is a Gretsch 5420 Electromatic . For some reason the designers at Gretsch moved away from the zero fret. When You string up with 10's or 9's I guess it probably doesn't matter much because the first position will be easy with light gauge strings. My touch and style of playing requires .012's. With heavier strings while the 5420 is beautiful to see and hear the first position was challenging to play. I installed the zero glide following the instructions in the package and to my amazing pleasure the 5420 played like my '66 Nashville used to. I couldn't be happier. Thanks to the people that designed this product. The tone is great the tuning is improved and the first position action is second to none.

Ron Carpenter Review pulled from Stew Macs Zero Glide Product Page

X