ZS-8 Slotted Replacement Nut for Banjos

A Zero Glide should be the ONLY to go on your instrument.

May 3, 2018

I have 3 instruments with a Zero Glide nut that I play regularly on shows and in jam sessions. My Gold Tone OB 150 has one as standard equipment from Gold Tone. Next is my Martin D custom Acoustic and next is my Washburn M3SWK F body mandolin. I did the install on those last 2 instruments. YES, you WILL have to do some fitting. Follow the instructions to the letter on this. YES, you may find it to be a pain but the gain is more than worth it. Once the Zero Glide is installed and once you start playing a few tunes, you will wonder why you have not installed a Zero Glide nut a lot sooner.

No more string binding issues, no more graphite in the slots or any grease either. You don't need that stuff anymore. No need for nut slot files either with a Zero Glide unless you get one un-slotted. You will still have to fit the Zero Glide nut so you can make it a part of your instrument. No getting around that. It is all part of the fun so enjoy the pain and take your time with the fitting. Once that is done, the action at the first fret will be perfect. Your tone will be better. You will get some sustain you haven't had before. The Zero Glide nut should be the ONLY nut to go on your instruments. I like what it does for playability and tone.

Raymond from

YES there is a Zero Glide nut for a square neck resonator.

Jul 16, 2021

Do you play a square neck Dobro You know that resonator guitar that is used in bluegrass music Then get a Zero Glide for that instrument. YES it works. I have a Gold Tone OB150 5 string banjo where I was introduced to the ZERO GLIDE nut system. This started a long time love affair with this fine invention. I installed one on a mandolin my Martin D custom that is my number 1 guitar I have one on one of my Telecasters and the rest will soon get them. If it has a nut then it needs a ZERO GLIDE nut. This is very easy to install you can even do the sanding to fit it with a Stew Mac tool that you use to sand nuts and saddles so you will be sure to get a perfectly flat surface for best results. Follow the instructions and you will be able to install the ZERO GLIDE nut even if you are not an experienced Luthier. You can improve tone on a entry level square neck resonator guitar like my Morgan Monroe and any other fretted instrument you install the ZERO GLIDE nut system. You can replace the cone and the spider bridge and the saddles with all the Beard goodies you can get to make your Dobro shine tone wise but DO NOT FORGET the ZERO GLIDE nut system. The one mod that will save you from a world of pain. You will not have to buy a very expensive set of nut files to install and set up a ZERO GLIDE nut system because it is not required unless you get one without slots for a custom job. The nut is bone and the fret wire is metal sometimes stainless steel so you are actually adding to your tone and you take away the usual nut issues with a Zero Glide. Everything I put a ZERO GLIDE nut system on plays much better and sounds much better too. YES there is a ZERO GLIDE nut for your Dobro and just about everything else. Need something custom ZERO GLIDE can help with custom nuts.

Ray Lawrence Jr

Install On Fender And Classic Nylon Guitar

Nov 9, 2016

I installed this on a fender for my friend, he loves it.s like using a capo I recent bought a 12 string zero fret and installed it on my Kirk Sands classic nylon and It truly makes a difference in tuning. No slip and holds well. William clamp

William from

An Excellent Product!

Apr 30, 2016

I bought two of these, one Gibson-style and one Fender-style for two of my favorite project guitars, an Epiphone LPX and my Jazz-O-Caster parts guitar. The Gibson was a near drop-in, needing only some trimming and shaping for a perfect fit. The Fender was slightly more challenging, as the neck on the Jazz-O-Caster never saw the inside of any Fender-approved factory! It required a 1/32" shim underneath for a proper fit, and some sanding to make room for the tang. There was a marked increase in the brightness of tone for both instruments, as well as improved intonation. This is MUCH easier than installing a traditional nut, and nearly foolproof IF you follow the instructions. Thanks, Stewart-Macdonald, for stocking such a well-engineered product.

John from