Stainless Steel Frets - Medium (.038")

I purchased a '97 Squier Vista MusicMaster Bass locally. The stock plastic nut needed replacing or filing. I had already pulled the nut off of the MusicMaster and had all measurements noted before replacing the stock nut temporarily. The Zero Glide ZS-17F Precision Bass Precision Bass model specs matched up with the MusicMaster specs. Cool. After my Zero Glide arrived I pulled the stock nut and lightly sanded the nut slot on the fretboard with fine sandpaper to remove any debris or adhesive residue used on the stock nut. Next I slid the Zero Glide nut onto the fretboard. Nice snug fit. The width of the Zero Glide was perfect. My next step was to make sure that the top / flat surface of the nut was flush with the fretboard. This is crucial to allowing the fret to seat correctly on both the fretboard and the zero fret nut. On my MusicMaster this required a very thin shim under the Zero Glide nut. Once the nut was seated properly it was just a matter of selecting which of the fret sizes provided is required for the instrument. In my case this was the longest installation step time-wise. Once you have selected the proper fret, mark the fret and cut with the proper tool. Examine the cut end of the and correct any imperfections due to cutting on the tang of the fret by filing. A small bench top vise with padded jaws and high quality file makes this step a snap. Installation time in my case : - shimming me the nut, less than 10 minutes - selecting the correct fret size, 45 minutes - all filing on the fret ends and top corners of the nut, less than 15 minutes I'm very pleased with the results. The open string notes sound like fretted notes of course, and I was able to achieve noticeably lower action without fret buzz after a setup. I'm especially pleased with the improved note definition of the open E and A strings. I did not check the intonation with the stock nut on the 1st five or so frets before I installed the Zero Glide, but the intonation is fine on the lower frets. My order was processed and shipped promptly and Gold Tone customer service is excellent. Thanks for a great product !

This is one of those things that you ask yourself why has no one thought of this before, but it likely would have been very difficult to produce on a volume scale without CNC machines.......I put the ZB4 on a Washburn parlor guitar and was amazed at the difference in tone clarity, sustain and definition as well as tuning stability and the lowest possible action.........What more could you ask for for one single mod??.....Zero Glide makes several different sizes etc to fit just about any guitar, so be sure you get the right model for your instrument. The unslotted ZB4 requires slotting, so it does require some skill and proper files. I would recommend letting a tech install if you have no experience or tools. I do predict that some of the major instrument makers will be using this in the near future. Why did'nt I think of this. JB/Texas

I recently custom installed a ZerO Glide on my 40 year old 12 string guitar and it really has done the business. There has been a marked improvement in volume and sustain tuning is much smoother and the intonation is spot on.