Speak with an Instrument Expert during business hours!
Business Hours:
Mon-Fri: 8:30am - 5:00pm
Sat-Sun: Closed
You Call, We Answer!
Chat with a real person
Email us directly
More Information
1-800-826-5482
contact@goldtone.com
Live Chat
Find A Dealer
Return Policy
Warranty Registration
Return Authorization (RA)
Per customer request, we are now proud to offer stainless steel Zero Glide frets! These frets basically do not wear out. This means they require no maintenance and never need to be replaced. Not only that, the stainless frets improve performance for tuning and bends. These frets are specially designed with an offset tang for our Zero Glide nut system. Comes in a pack of 3.
Available in Medium (.038"), Jumbo (.051"), and Super Jumbo (.058"), or an assorted pack of each size.
I've used this for over a month and I'm more happy now than when I first installed it. The intonation on my acoustic is better than it ever was...you can fine tune the saddle almost dead on for intonation. One suggestion.....be sure to glue in the zero fret with a few drops of glue once you get the guitar right. I was working on my guitar on and off for a month and didn't glue in the zero fret. I was taking the strings on and off. Every time you reinstall the zero fret it will be in a slightly different place. String against fret will cause a slightly different indentation in the zero fret. You want the string to stay in the same spot on the zero fret.
Just got a second one. Used the first on a Tele build. The multiple heights included give plenty of options. Takes some tweaking but so does a standard nut and you don't have to worry about overdoing anything.
Had tuning stability and buzzing issues after ten years on my first bone nut. Also have always been bothered by open string vs. fretted string sounds. I play mostly flat picking/crosspicking styles and Travis style picking. The consistency of the note makes both more enjoyable for me. No buzzing lower action smoother tuning smoother playing easier bending etc... Have all been a result. Took me about two hours to get height and width of nut and fret correct. Had to get a smaller get shipped from gold tone and their customer service was the easiest I have ever experienced. Had part in two days and I am satisfied.
Improved the playability of my Fender stratocaster
Just put one of these on an old beater of a cheap strat-clone kit that I use to experiment with "creative" wiring. Suddenly its in tune up and down the neck and stays that way after using the trem as well. It cost half the price of the kit but it has significantly improved the value of the instrument to me. It required a little sanding of the back of the nut but nothing drastic. I dont have many dedicated luthier tools so the fret wire is not trimmed perfectly (but the look is in keeping with the overall "relic'd" appearance of the guitar). The question now becomes can I get a discount if I order these in bulk?
