Speak with an Instrument Expert during business hours!
Business Hours:
Mon-Fri: 8:30am - 5:00pm
Sat-Sun: Closed
You Call, We Answer!
Chat with a real person
Email us directly
More Information
1-800-826-5482
contact@goldtone.com
Live Chat
Find A Dealer
Return Policy
Warranty Registration
Return Authorization (RA)
Per customer request, we are now proud to offer stainless steel Zero Glide frets! These frets basically do not wear out. This means they require no maintenance and never need to be replaced. Not only that, the stainless frets improve performance for tuning and bends. These frets are specially designed with an offset tang for our Zero Glide nut system. Comes in a pack of 3.
Available in Medium (.038"), Jumbo (.051"), and Super Jumbo (.058"), or an assorted pack of each size.
I bought two of these, one Gibson-style and one Fender-style for two of my favorite project guitars, an Epiphone LPX and my Jazz-O-Caster parts guitar. The Gibson was a near drop-in, needing only some trimming and shaping for a perfect fit. The Fender was slightly more challenging, as the neck on the Jazz-O-Caster never saw the inside of any Fender-approved factory! It required a 1/32" shim underneath for a proper fit, and some sanding to make room for the tang. There was a marked increase in the brightness of tone for both instruments, as well as improved intonation. This is MUCH easier than installing a traditional nut, and nearly foolproof IF you follow the instructions. Thanks, Stewart-Macdonald, for stocking such a well-engineered product.
Wow, what an innovation! This product eliminates the critical process of nut filing completely disappear to be replaced by a zero fret which enhances the sound of your guitar. It is not without some challenges in installation, but once completed your guitar just sounds and plays better.
The bone nut was easy to install. I sanded the length and depth with a table sander. The instructions are complete and easy to follow. Four zero frets of different sizes are included in the banjo kit--you try the smallest and work your way up until you have no open string buzz. Use medium viscosity cyanoacrylate (available from Stewmac) so you have time to set the nut and fret properly. I'm pleased with the results, improved tone, and hammer-ons and pull-offs are more defined.
The Zero Glide performs like the manufacturer claims it will. It took less than one hour to complete the installation and have the guitar playing. The nut I removed was cheap plastic and the thin wires had cut down into the nut to the point that there was severe fret buzz on the open strings. The Zero Glide cured that and has all of the strings at the same level. I used a disc sander to shape the nut to length and height in a few minutes. About five more minutes and the nut was polished. The installation looks good. I suggest a person view the manufacturer's installation video before doing the installation.
