Speak with an Instrument Expert during business hours!
Business Hours:
Mon-Fri: 8:30am - 5:00pm
Sat-Sun: Closed
You Call, We Answer!
Chat with a real person
Email us directly
More Information
1-800-826-5482
contact@goldtone.com
Live Chat
Find A Dealer
Return Policy
Warranty Registration
Return Authorization (RA)
Per customer request, we are now proud to offer stainless steel Zero Glide frets! These frets basically do not wear out. This means they require no maintenance and never need to be replaced. Not only that, the stainless frets improve performance for tuning and bends. These frets are specially designed with an offset tang for our Zero Glide nut system. Comes in a pack of 3.
Available in Medium (.038"), Jumbo (.051"), and Super Jumbo (.058"), or an assorted pack of each size.
The Zero Glide performs like the manufacturer claims it will. It took less than one hour to complete the installation and have the guitar playing. The nut I removed was cheap plastic and the thin wires had cut down into the nut to the point that there was severe fret buzz on the open strings. The Zero Glide cured that and has all of the strings at the same level. I used a disc sander to shape the nut to length and height in a few minutes. About five more minutes and the nut was polished. The installation looks good. I suggest a person view the manufacturer's installation video before doing the installation.
My circa 1997 American Standard Strat always had a problem with staying in tune after whammy bar use. I tried pencil graphite and different string sizes with not much luck. I put this nut on and a set of Gotoh locking tuners and now it seems to stay in tune very well.
I just installed a Zero Glide Nut on my '14 Les Paul Studio. I was having trouble with the traditional *tink* and tuning issues often associated with Gibsons. Initially, I was going to try the new titanium nut made by Gibson but was told that it would not fit my '14 Les Paul. Keep in mind, I have never installed a nut before on a guitar where I needed to remove the old one. I had only fixed broken nuts in the past. I say this because I had a little anxiety when I decided to install the nut myself. The first thing I noticed was how much extra material must be sanded to get a perfect fit. For my application, I had to sand the bottom of the nut as well to get the fret to seat properly against the fret board. This may sound bad, but it is a good thing! It means that the folks at Stew-Mac realize (as I hope you do) that although these are precision instruments, there are many parts that are finished out by hand. The extra material allows for those minor variations and with a little work,
