Speak with an Instrument Expert during business hours!
Business Hours:
Mon-Fri: 8:30am - 5:00pm
Sat-Sun: Closed
You Call, We Answer!
Chat with a real person
Email us directly
More Information
1-800-826-5482
contact@goldtone.com
Live Chat
Find A Dealer
Return Policy
Warranty Registration
Return Authorization (RA)
Per customer request, we are now proud to offer stainless steel Zero Glide frets! These frets basically do not wear out. This means they require no maintenance and never need to be replaced. Not only that, the stainless frets improve performance for tuning and bends. These frets are specially designed with an offset tang for our Zero Glide nut system. Comes in a pack of 3.
Available in Medium (.038"), Jumbo (.051"), and Super Jumbo (.058"), or an assorted pack of each size.
Works as described but installation was a pain. I have a warmoth tele neck that I installed it to. I had to cut back the nut slot a little to fit the new bone nut and fret in place. I thought it would just drop in.. I wasn't anticipating that but my skills didn't let me down. I filed the nut and fret down on both sides a little, added some super glue and now it works great. i have a bigsby so tunning is a breeze now!
The bone nut was easy to install. I sanded the length and depth with a table sander. The instructions are complete and easy to follow. Four zero frets of different sizes are included in the banjo kit--you try the smallest and work your way up until you have no open string buzz. Use medium viscosity cyanoacrylate (available from Stewmac) so you have time to set the nut and fret properly. I'm pleased with the results, improved tone, and hammer-ons and pull-offs are more defined.
works like a charm for the stuff I do at weekend gigs,from flutter trem to dive whammy , but most of all, I no longer hear that creaking sound by the nut when using my tremolo and it stays in tune well along with my Wilkinson VSVG Tremolo.
Easy to install for me cause I work for two guitar shops on a on/off basis and am use to making bone nuts from scratch,so if you've never done guitar nut work before I suggest taking it to a well trusted guitar shop with a good tech. It does take patience if you want it to look like a pro and function the way its suppose to. Highly recommend it along with a Wilkinson VSVG and a high gear ratio tuners.. Be buying more soon for my other guitars....
I have a Yamaha F310 and the nut was cut real high. Looking around on the internet I came across the ZerO Glide and decided to give it a try. It was less expensive that having the nut cut or purchasing the tools to do it. Printed out the sizing chart and found the ZS-5 had the correct spacing. In less than an hour my guitar felt and sounded great. This is one hell of a product and glad I made the purchase.
