Speak with an Instrument Expert during business hours!
Business Hours:
Mon-Fri: 8:30am - 5:00pm
Sat-Sun: Closed
You Call, We Answer!
Chat with a real person
Email us directly
More Information
1-800-826-5482
contact@goldtone.com
Live Chat
Find A Dealer
Return Policy
Warranty Registration
Return Authorization (RA)
Per customer request, we are now proud to offer stainless steel Zero Glide frets! These frets basically do not wear out. This means they require no maintenance and never need to be replaced. Not only that, the stainless frets improve performance for tuning and bends. These frets are specially designed with an offset tang for our Zero Glide nut system. Comes in a pack of 3.
Available in Medium (.038"), Jumbo (.051"), and Super Jumbo (.058"), or an assorted pack of each size.
My circa 1997 American Standard Strat always had a problem with staying in tune after whammy bar use. I tried pencil graphite and different string sizes with not much luck. I put this nut on and a set of Gotoh locking tuners and now it seems to stay in tune very well.
One for Fender Telecaster, the other for Breedlove acoustic. Both of these guitars are top 10 instruments. The Zero Glide nut improvement came through as described on Youtube demos. So much better string action (lower with out any fret buzz) Clarity in open string tone chords and pulloff plucking, faster tuning to pitch, using electronic tuner, remaining in pitch once strings stretch has settled in. I took my time to install on both guitars about 2 hours for each instrument. Have new custom Guitar that I will 99% sure I will add this improvement to soon. I see this becoming a standard upgrade to many popular manufactures. Lastly the sustain in open chords on all strings cant be described.
An inexperienced guitar tech worked on the nut of my Guild M75 Aristocrat electric and I ended up with a "sitar" sound on my high E string and a dead G string and bad intonation. A friend recommended Zero Glide and that company recommended this particular nut.
Installation was not particularly difficult for a handy guy, but took two hours and involved sanding nearly 1/8 inch off the bottom of the new nut and 1/16th plus off each side while being careful to keep it even. The video on the company website helps. Once fitted correctly you decide how big of a 'zero fret' you want. There are four of different sizes in the package. I tried them all and found that the smaller ones provide very low action at the nut (which is nice), but require a higher action up the neck to clear the first fret where the strings can rattle. I ended up using the largest fret provided as it allowed me low action where I need it. Once you have it figured out you trim the zero fret to length and glue it
Love the zero glide nut! It makes my open strings ring longer and clear like a fretted note making chords that incorporate both sound more even. It took almost no time to install on my stratocAster and I'm going to mod my Tele now too.
