ZS-7F Slotted Replacement Nut for Guitars (Common on Fender)

$39.99

Material

Hand

Slots

The Zero Glide Replacement Nut System borrows the "zero fret" concept to reduce string contact in the nut by up to 93%, increasing tuning stability, playability, and open string tone. It only takes a few minutes to install with absolutely no permanent alteration to your instrument. For Fender Style Guitar.

*The ZS-7F is designed to fit either a flat or radiused nut shelf. Leave the middle nub for flat, or sand it down for a radius.

Also available in Black Delrin.

Note: May not fit specific models. Check the sizing guide to be sure.

Free 2-Day Shipping (Continental US Only)
See sizing guide for correct fit.
  • Length: 42.8mm (1-11/16")
  • Radius: 9.5"
  • Production Height: 4.9mm (13/64")
  • End Height: 3.95mm (5/32")
  • Fingerboard: 2.9mm (7/64")
  • Thickness: 2.8mm (7/64")
  • Fret Sizes: L, M, H, J (.035", .039", .043", .051")
  • String Spacing: 34.8mm (1-3/8")
  • String Gauges: .046", .036", .026", .017", .013", .010"
ZS-7F Slotted Replacement Nut for Guitars (Common on Fender)
*Measurements in mm
Convert to inches

Reviews

Great product

Dec 31, 2017

My circa 1997 American Standard Strat always had a problem with staying in tune after whammy bar use. I tried pencil graphite and different string sizes with not much luck. I put this nut on and a set of Gotoh locking tuners and now it seems to stay in tune very well.

Jeff from Review pulled from Stew Macs Zero Glide Product Page
Single best upgrade I ve ever done

Jan 11, 2025
Replaced a stock plastic nut on my Squier Jaguar short scale bass with a zero glide today. Hand down the best upgrade I ve done to that or any instrument since I ve started playing. Action is now perfect intonation is spot on tuning is even better/easier as there is less friction to deal with. My initial reasoning for this upgrade was to minimize any nut work needed when changing string gauges now I just have to set intonation and tuning and it s good to go I didn t expect the immense open string clarity change nor did I expect that this bass could get any more sustain out of it but I stand corrected I ll be upgrading every bass and guitar I own to a zero glide now If you re on the fence just go for it - you won t be disappointed
Craig Miller Review pulled from Stew Macs Zero Glide Product Page
Zero Glide Nut@ Livewerks Guitars

Oct 22, 2016

Installed in a vintage Japanese Custom Shop Fender Tele. Great low action and better tuning stability. Easy install as well. Thanks for a great product.

Michael from Review pulled from Stew Macs Zero Glide Product Page
martin nut

Nov 4, 2023
Now that I have it setup I love it. The kits should have all available nut wires in it. I had to special order the largest wire for my Martin Dred kit because the included were too small.
Ken Fuehrer Review pulled from Stew Macs Zero Glide Product Page
Low Action, High Satisfaction!

Jul 8, 2016

My old nut was too high. And I didn't want to buy 6 nut files. This Zero glide was much, MUCH cheaper, and it was an easy instal. I taped some 400 grit sandpaper to a plank I had laying around. Sand sand sand, check the fit, repeat. I tried each fret it came with and chose the jumbo. I consider this a major upgrade to my home built super strat.

Jacob Mitchell from Review pulled from Amazons Zero Glide Product Page

X