Speak with an Instrument Expert during business hours!
Business Hours:
Mon-Fri: 8:30am - 5:00pm
Sat-Sun: Closed
You Call, We Answer!
Chat with a real person
Email us directly
More Information
1-800-826-5482
contact@goldtone.com
Live Chat
Find A Dealer
Return Policy
Warranty Registration
Return Authorization (RA)
The Zero Glide Replacement Nut System borrows the "zero fret" concept to reduce string contact in the nut by up to 93%, increasing tuning stability, playability, and open string tone. It only takes a few minutes to install with absolutely no permanent alteration to your instrument. For Fender Style Guitar.
*The ZS-7F is designed to fit either a flat or radiused nut shelf. Leave the middle nub for flat, or sand it down for a radius.
Also available in Black Delrin.
Note: May not fit specific models. Check the sizing guide to be sure.
The Zero Glide performs like the manufacturer claims it will. It took less than one hour to complete the installation and have the guitar playing. The nut I removed was cheap plastic and the thin wires had cut down into the nut to the point that there was severe fret buzz on the open strings. The Zero Glide cured that and has all of the strings at the same level. I used a disc sander to shape the nut to length and height in a few minutes. About five more minutes and the nut was polished. The installation looks good. I suggest a person view the manufacturer's installation video before doing the installation.
i HAVE ONE O TFHE NICER IMPORT JOHNSON ACOUSTIC ELECTRIC CUTAWAY GUITARS . SOLID SPRUCE TOP. INDIAN ROSEWOOD BACK AND SIDES. SOMETIME BACK I WAS ADJUSTING THE TRUSS ROD AND THE END BROKE OFF. LUCKILY THE ACTION WASN'T TERRIBLE. THE REAL PROBLEM I WAS HAVING WAS WHEN I PLAYED AT CHURCH I SWITCH BACK AND FORTH FROM CAPO TO NO CAPO DEPENDING ON THE SONG CHOSEN. WHEN I TUNED MY GUITAR STANDARD IT WAS FINE AND SOUNDED PRETTY GOOD BUT WHEN I USED THE CAPO THE GUITAR WOULD BE SLIGHTLY OUT OF TUNE. i JUST HAPPENED ACROSS TE ZERO GLIDE AND FIGURED I HAD NOTHING TO LOSE SINCE I COULD RETURN THE NUT BACK TO ORIGINAL WITH NO PROBLEM. I GOT THE CORRECT NUT BY USING THE STRING GUIDE PRINT OUT. TOOK MY TIME FOLLOWED VIDEO INSTRUCTIONS AND MADE MINOR ADJUSTMENTS UNTIL I WAS DONE. I CANNOT TELL YOU HOW PLEASED I AM. NO MORE OUT OF TUNE WITH CAPO. CONSISTENT BRIGHTER SOUND AND MUCH BETTER ACTION. I WOULD RECOMMEND THIS PRODUCT TO ANYONE I AM EVEN THINKING OF PUTTING ONE ON MY 1963 GIBSON LG1 SINCE THERE IS NO PERMANENT CHANGE TO THE GUITAR. THANKS ZERO GLIDE
I just put the Zero Glide on my guitar. Very impressed. This is as close to perfect as I can get. I can bend all over the guitar and 95 of the time the notes come back to the original pitch....the few times they don t it s so minimal most people wouldn t notice it....I really believe that it s probably the tuners....they re decent low grade tuners. Nothing special. Amazing considering this is a 300.00 guitar. I checked the space between the 1st fret and the E and B strings fretted at the third fret...distance between 1st fret and bottom of string .....they looked like they were less than a thousandth and the guitar was not buzzing on an open string. The action is very low with extra thin strings on it. This made the guitar play even easier. I had the strings set at about 4 thousandths from the first fret while fretting at the third. This took them lower....especially on the first 5 frets. Good job on this I do wish they would have sent me a smaller fret.
The bone nut was easy to install. I sanded the length and depth with a table sander. The instructions are complete and easy to follow. Four zero frets of different sizes are included in the banjo kit--you try the smallest and work your way up until you have no open string buzz. Use medium viscosity cyanoacrylate (available from Stewmac) so you have time to set the nut and fret properly. I'm pleased with the results, improved tone, and hammer-ons and pull-offs are more defined.
$39.99
