ZS-13 Slotted Replacement Nut for Classical Guitars

i HAVE ONE O TFHE NICER IMPORT JOHNSON ACOUSTIC ELECTRIC CUTAWAY GUITARS . SOLID SPRUCE TOP. INDIAN ROSEWOOD BACK AND SIDES. SOMETIME BACK I WAS ADJUSTING THE TRUSS ROD AND THE END BROKE OFF. LUCKILY THE ACTION WASN'T TERRIBLE. THE REAL PROBLEM I WAS HAVING WAS WHEN I PLAYED AT CHURCH I SWITCH BACK AND FORTH FROM CAPO TO NO CAPO DEPENDING ON THE SONG CHOSEN. WHEN I TUNED MY GUITAR STANDARD IT WAS FINE AND SOUNDED PRETTY GOOD BUT WHEN I USED THE CAPO THE GUITAR WOULD BE SLIGHTLY OUT OF TUNE. i JUST HAPPENED ACROSS TE ZERO GLIDE AND FIGURED I HAD NOTHING TO LOSE SINCE I COULD RETURN THE NUT BACK TO ORIGINAL WITH NO PROBLEM. I GOT THE CORRECT NUT BY USING THE STRING GUIDE PRINT OUT. TOOK MY TIME FOLLOWED VIDEO INSTRUCTIONS AND MADE MINOR ADJUSTMENTS UNTIL I WAS DONE. I CANNOT TELL YOU HOW PLEASED I AM. NO MORE OUT OF TUNE WITH CAPO. CONSISTENT BRIGHTER SOUND AND MUCH BETTER ACTION. I WOULD RECOMMEND THIS PRODUCT TO ANYONE I AM EVEN THINKING OF PUTTING ONE ON MY 1963 GIBSON LG1 SINCE THERE IS NO PERMANENT CHANGE TO THE GUITAR. THANKS ZERO GLIDE

This is one of those things that you ask yourself why has no one thought of this before, but it likely would have been very difficult to produce on a volume scale without CNC machines.......I put the ZB4 on a Washburn parlor guitar and was amazed at the difference in tone clarity, sustain and definition as well as tuning stability and the lowest possible action.........What more could you ask for for one single mod??.....Zero Glide makes several different sizes etc to fit just about any guitar, so be sure you get the right model for your instrument. The unslotted ZB4 requires slotting, so it does require some skill and proper files. I would recommend letting a tech install if you have no experience or tools. I do predict that some of the major instrument makers will be using this in the near future. Why did'nt I think of this. JB/Texas

I just installed a Zero Glide Nut on my '14 Les Paul Studio. I was having trouble with the traditional *tink* and tuning issues often associated with Gibsons. Initially, I was going to try the new titanium nut made by Gibson but was told that it would not fit my '14 Les Paul. Keep in mind, I have never installed a nut before on a guitar where I needed to remove the old one. I had only fixed broken nuts in the past. I say this because I had a little anxiety when I decided to install the nut myself. The first thing I noticed was how much extra material must be sanded to get a perfect fit. For my application, I had to sand the bottom of the nut as well to get the fret to seat properly against the fret board. This may sound bad, but it is a good thing! It means that the folks at Stew-Mac realize (as I hope you do) that although these are precision instruments, there are many parts that are finished out by hand. The extra material allows for those minor variations and with a little work,