ZS-15 Slotted Replacement Nut for Guitars

$39.99

Material

Hand

Slots

The Zero Glide Replacement Nut System borrows the "zero fret" concept to reduce string contact in the nut by up to 93%, increasing tuning stability, playability, and open string tone. It only takes a few minutes to install with absolutely no permanent alteration to your instrument. For Guitar.

Also available in Black Delrin.

Free 2-Day Shipping (Continental US Only)
See sizing guide for correct fit.
  • Length: 47.5mm (1-7/8")
  • Radius: 16"
  • Production Height: 9.5mm (3/8")
  • End Height: 8.8mm (11/32")
  • Fingerboard: 7.3mm (9/32")
  • Thickness: 5.9mm (15/64")
  • Fret Sizes: L, M, H, J (.035", .039", .043", .051")
  • String Spacing: 38.5mm (1-33/64")
  • String Gauges: .056", .046", .036", .026", .018", .014"
ZS-15 Slotted Replacement Nut for Guitars
*Measurements in mm
Convert to inches

Reviews

Great product!!!

Oct 18, 2020

Easy to install. I'll use it on all my new builds.

Lewis Parker from Review pulled from Stew Macs Zero Glide Product Page
Good stuff The rest of the story 2

May 15, 2017

I just put the Zero Glide on my guitar. Very impressed. This is as close to perfect as I can get. I can bend all over the guitar and 95 of the time the notes come back to the original pitch....the few times they don t it s so minimal most people wouldn t notice it....I really believe that it s probably the tuners....they re decent low grade tuners. Nothing special. Amazing considering this is a 300.00 guitar. I checked the space between the 1st fret and the E and B strings fretted at the third fret...distance between 1st fret and bottom of string .....they looked like they were less than a thousandth and the guitar was not buzzing on an open string. The action is very low with extra thin strings on it. This made the guitar play even easier. I had the strings set at about 4 thousandths from the first fret while fretting at the third. This took them lower....especially on the first 5 frets. Good job on this I do wish they would have sent me a smaller fret.

David Kennedy Review pulled from Stew Macs Zero Glide Product Page
This Fixed It

Nov 3, 2023
The G string on my Epiphone Dot was bound up in the nut and always pinging loose when trying to tune it. It would suddenly be sharp then suddenly flat etc. I installed a Zero Glide on her her and problem solved. Not only that but it has also improved tone. Honestly I was just trying to do a quick fix in order to sell her but the new life in her changed my mind.
Gene Molloy Review pulled from Stew Macs Zero Glide Product Page
Great once installed

Jan 27, 2018

Works as described but installation was a pain. I have a warmoth tele neck that I installed it to. I had to cut back the nut slot a little to fit the new bone nut and fret in place. I thought it would just drop in.. I wasn't anticipating that but my skills didn't let me down. I filed the nut and fret down on both sides a little, added some super glue and now it works great. i have a bigsby so tunning is a breeze now!

Miguel from Review pulled from Stew Macs Zero Glide Product Page
Zero Fret for Hofner Ignition bass

Nov 3, 2023
This is a great upgrade not just for replacing the nut but adding the zero fret gives some tone clarity on the open strings . Easy install no issues glad I did it .
S.Bravo Review pulled from Stew Macs Zero Glide Product Page

X