ZS-20 Slotted Replacement Nut for 12-string Guitars

$39.99

Material

Slots

The Zero Glide Replacement Nut System borrows the "zero fret" concept to reduce string contact in the nut by up to 93%, increasing tuning stability, playability, and open string tone. It only takes a few minutes to install with absolutely no permanent alteration to your instrument. For 12 String Guitar (For Taylor Guitars).

Also available in Black Delrin.

Free 2-Day Shipping (Continental US Only)
See sizing guide for correct fit.
  • Length: 52.0mm (2-3/64")
  • Radius: 16"
  • Production Height: 9.5mm (3/8")
  • End Height: 8.5mm (21/64")
  • Fingerboard: 7mm (9/32")
  • Thickness: 5.9mm (15/64")
  • Fret Sizes: L, M, H, J (.035", .039", .043", .051")
  • String Spacing: 41.7mm (1-41/64")
  • String Gauges: .036", .060", .022", .045", .018", .036", .015", .027", .018", .018", .016", .016"

Reviews

Great Product For Any Guitar.

Oct 14, 2015

Wow, what an innovation! This product eliminates the critical process of nut filing completely disappear to be replaced by a zero fret which enhances the sound of your guitar. It is not without some challenges in installation, but once completed your guitar just sounds and plays better.

R. Jarman from Review pulled from Amazons Zero Glide Product Page
Good stuff

May 15, 2017

I m impressed with this. Easy to install. I m not a luthiar but I have refretted a few guitars and made some nuts and saddles. This is a pretty incredible system. I was going to cut a new nut for an acoustic guitar I just bought. I tested it and it was not sliding perfectly through the nut even though there was no ping while tuning. The way I test a nut is to strike a note then smack the string between the nut and the machine heads. behind the nut I put a tuner on the head stock so I can watch the note go up and come back. It simulates a good bend and you can watch the quality of the nut you have on the guitar. Most guitars will stick at about 6 to 10 cents above the tuned note unless you have a really well cut nut. At least the wound strings will....steel strings will usually drop back to the tuned note if the nut is decent . The nut I had on this guitar was pretty good....no pings while tuning yet it would still catch occasionally which effected tuning.

David Kennedy Review pulled from Amazons Zero Glide Product Page
Wonderful addition to my old Yamaha FG-180 Red Label guitar

Nov 3, 2023
The installation was not difficult but it did require patience and good workmanship when shaping the Zero Glide. I bought the black version and really like it's understated appearance.
Jim Edgington Review pulled from Amazons Zero Glide Product Page
Zero Glide Query

Jun 23, 2025
I have a BC-350 banjo with the zero glide nut. It has been problem-free but I'm curious how this is an improvement over the zero nut found on budget European guitars since practically the beginning of time. I repaired instruments for decades and always regarded the zero fret as a marker of an inferior mass-produced instrument. No criticism of the Gold Tone zero glide is in any way implied here but I am confused.
CHRIS Battis Review pulled from Amazons Zero Glide Product Page
Good stuff The rest of the story 2

May 15, 2017

I just put the Zero Glide on my guitar. Very impressed. This is as close to perfect as I can get. I can bend all over the guitar and 95 of the time the notes come back to the original pitch....the few times they don t it s so minimal most people wouldn t notice it....I really believe that it s probably the tuners....they re decent low grade tuners. Nothing special. Amazing considering this is a 300.00 guitar. I checked the space between the 1st fret and the E and B strings fretted at the third fret...distance between 1st fret and bottom of string .....they looked like they were less than a thousandth and the guitar was not buzzing on an open string. The action is very low with extra thin strings on it. This made the guitar play even easier. I had the strings set at about 4 thousandths from the first fret while fretting at the third. This took them lower....especially on the first 5 frets. Good job on this I do wish they would have sent me a smaller fret.

David Kennedy Review pulled from Amazons Zero Glide Product Page

X