ZS-20 Slotted Replacement Nut for 12-string Guitars

Zero Glide Query

Jun 23, 2025

I have a BC-350 banjo with the zero glide nut. It has been problem-free but I'm curious how this is an improvement over the zero nut found on budget European guitars since practically the beginning of time. I repaired instruments for decades and always regarded the zero fret as a marker of an inferior mass-produced instrument. No criticism of the Gold Tone zero glide is in any way implied here but I am confused.

CHRIS Battis

This Fixed It

Nov 3, 2023

The G string on my Epiphone Dot was bound up in the nut and always pinging loose when trying to tune it. It would suddenly be sharp then suddenly flat etc. I installed a Zero Glide on her her and problem solved. Not only that but it has also improved tone. Honestly I was just trying to do a quick fix in order to sell her but the new life in her changed my mind.

Gene Molloy

Worth The Effort

May 15, 2016

An inexperienced guitar tech worked on the nut of my Guild M75 Aristocrat electric and I ended up with a "sitar" sound on my high E string and a dead G string and bad intonation. A friend recommended Zero Glide and that company recommended this particular nut.

Installation was not particularly difficult for a handy guy, but took two hours and involved sanding nearly 1/8 inch off the bottom of the new nut and 1/16th plus off each side while being careful to keep it even. The video on the company website helps. Once fitted correctly you decide how big of a 'zero fret' you want. There are four of different sizes in the package. I tried them all and found that the smaller ones provide very low action at the nut (which is nice), but require a higher action up the neck to clear the first fret where the strings can rattle. I ended up using the largest fret provided as it allowed me low action where I need it. Once you have it figured out you trim the zero fret to length and glue it

WAL from

I nutted

Aug 28, 2022

I bought one for my generic mass produced bass don't get me wrong It's an awesome bass . I recently had It refretted with jumbo gold bell brass frets and It's regular plastic nut started to feel off. I did a little search on web and came upto this products. I combined It with my leftover gold fret wire and boom I Nutted Finally after years of trying to prevent using open strings on my bass I can enjoy that low open string notes sustaining to eternity. 100 recommended and If you ever get a custom made instrument insist on the 0 fret option. You can try different gauge strings without worrying about nut slot shapes and widths.

Wesley Warren Jr.