Speak with an Instrument Expert during business hours!
Business Hours:
Mon-Fri: 8:30am - 5:00pm
Sat-Sun: Closed
You Call, We Answer!
Chat with a real person
Email us directly
More Information
1-800-826-5482
contact@goldtone.com
Live Chat
Find A Dealer
Return Policy
Warranty Registration
Return Authorization (RA)
The Zero Glide Replacement Nut System borrows the "zero fret" concept to reduce string contact in the nut by up to 93%, increasing tuning stability, playability, and open string tone. It only takes a few minutes to install with absolutely no permanent alteration to your instrument. For Fender Style Guitar.
*The ZS-7F is designed to fit either a flat or radiused nut shelf. Leave the middle nub for flat, or sand it down for a radius.
Also available in Black Delrin.
Note: May not fit specific models. Check the sizing guide to be sure.
The Zero Glide performs like the manufacturer claims it will. It took less than one hour to complete the installation and have the guitar playing. The nut I removed was cheap plastic and the thin wires had cut down into the nut to the point that there was severe fret buzz on the open strings. The Zero Glide cured that and has all of the strings at the same level. I used a disc sander to shape the nut to length and height in a few minutes. About five more minutes and the nut was polished. The installation looks good. I suggest a person view the manufacturer's installation video before doing the installation.
I m impressed with this. Easy to install. I m not a luthiar but I have refretted a few guitars and made some nuts and saddles. This is a pretty incredible system. I was going to cut a new nut for an acoustic guitar I just bought. I tested it and it was not sliding perfectly through the nut even though there was no ping while tuning. The way I test a nut is to strike a note then smack the string between the nut and the machine heads. behind the nut I put a tuner on the head stock so I can watch the note go up and come back. It simulates a good bend and you can watch the quality of the nut you have on the guitar. Most guitars will stick at about 6 to 10 cents above the tuned note unless you have a really well cut nut. At least the wound strings will....steel strings will usually drop back to the tuned note if the nut is decent . The nut I had on this guitar was pretty good....no pings while tuning yet it would still catch occasionally which effected tuning.
Resolves the nut-string height issue with a simple and easy installation. Worked perfect on my Heritage 16.
works like a charm for the stuff I do at weekend gigs,from flutter trem to dive whammy , but most of all, I no longer hear that creaking sound by the nut when using my tremolo and it stays in tune well along with my Wilkinson VSVG Tremolo.
Easy to install for me cause I work for two guitar shops on a on/off basis and am use to making bone nuts from scratch,so if you've never done guitar nut work before I suggest taking it to a well trusted guitar shop with a good tech. It does take patience if you want it to look like a pro and function the way its suppose to. Highly recommend it along with a Wilkinson VSVG and a high gear ratio tuners.. Be buying more soon for my other guitars....
