Speak with an Instrument Expert during business hours!
Business Hours:
Mon-Fri: 8:30am - 5:00pm
Sat-Sun: Closed
You Call, We Answer!
Chat with a real person
Email us directly
More Information
1-800-826-5482
contact@goldtone.com
Live Chat
Find A Dealer
Return Policy
Warranty Registration
Return Authorization (RA)
The Zero Glide Replacement Nut System borrows the "zero fret" concept to reduce string contact in the nut by up to 93%, increasing tuning stability, playability, and open string tone. It only takes a few minutes to install with absolutely no permanent alteration to your instrument. For Fender Style Guitar.
*The ZS-7F is designed to fit either a flat or radiused nut shelf. Leave the middle nub for flat, or sand it down for a radius.
Also available in Black Delrin.
Note: May not fit specific models. Check the sizing guide to be sure.
I installed this on an old Alvarez acoustic that used to belong to my Dad. The strings had started to buzz badly and the bridge height was maxed out so I knew it must be the nut. Took about an hour to cut down the new nut and shape with the Drexel tool; sided/polished the frets and installed glide nut with the tallest feet wire. Worked like a charm and no more buzzing. Even lowed the bridge down to a reasonable height as well. Great product and easy to install.
Easy to install. I'll use it on all my new builds.
My circa 1997 American Standard Strat always had a problem with staying in tune after whammy bar use. I tried pencil graphite and different string sizes with not much luck. I put this nut on and a set of Gotoh locking tuners and now it seems to stay in tune very well.
This is one of those things that you ask yourself why has no one thought of this before, but it likely would have been very difficult to produce on a volume scale without CNC machines.......I put the ZB4 on a Washburn parlor guitar and was amazed at the difference in tone clarity, sustain and definition as well as tuning stability and the lowest possible action.........What more could you ask for for one single mod??.....Zero Glide makes several different sizes etc to fit just about any guitar, so be sure you get the right model for your instrument. The unslotted ZB4 requires slotting, so it does require some skill and proper files. I would recommend letting a tech install if you have no experience or tools. I do predict that some of the major instrument makers will be using this in the near future. Why did'nt I think of this. JB/Texas
$39.99
