Speak with an Instrument Expert during business hours!
Business Hours:
Mon-Fri: 8:30am - 5:00pm
Sat-Sun: Closed
You Call, We Answer!
Chat with a real person
Email us directly
More Information
1-800-826-5482
contact@goldtone.com
Live Chat
Find A Dealer
Return Policy
Warranty Registration
Return Authorization (RA)
The Zero Glide Replacement Nut System borrows the "zero fret" concept to reduce string contact in the nut by up to 93%, increasing tuning stability, playability, and open string tone. It only takes a few minutes to install with absolutely no permanent alteration to your instrument. For Fender Style Guitar.
*The ZS-7F is designed to fit either a flat or radiused nut shelf. Leave the middle nub for flat, or sand it down for a radius.
Also available in Black Delrin.
Note: May not fit specific models. Check the sizing guide to be sure.
The bone nut was easy to install. I sanded the length and depth with a table sander. The instructions are complete and easy to follow. Four zero frets of different sizes are included in the banjo kit--you try the smallest and work your way up until you have no open string buzz. Use medium viscosity cyanoacrylate (available from Stewmac) so you have time to set the nut and fret properly. I'm pleased with the results, improved tone, and hammer-ons and pull-offs are more defined.
The ZerO Glide Nuts are everything they say they are,.. and more. I just started playing guitar about 3 years ago, but I've worked with wood and restoring antiques all my life, so those skills and knowledge have been bleeding over into guitar maintenance.
This so to speak, was my first nut job. But the idea was clear from the start - remove & replace. Now the guitar nobody thought was worth fixing, is playing hotter than it ever was. Many thanks to StewMac for suppling quality from and for craftsmen.
Installed in a vintage Japanese Custom Shop Fender Tele. Great low action and better tuning stability. Easy install as well. Thanks for a great product.
I bought two of these, one Gibson-style and one Fender-style for two of my favorite project guitars, an Epiphone LPX and my Jazz-O-Caster parts guitar. The Gibson was a near drop-in, needing only some trimming and shaping for a perfect fit. The Fender was slightly more challenging, as the neck on the Jazz-O-Caster never saw the inside of any Fender-approved factory! It required a 1/32" shim underneath for a proper fit, and some sanding to make room for the tang. There was a marked increase in the brightness of tone for both instruments, as well as improved intonation. This is MUCH easier than installing a traditional nut, and nearly foolproof IF you follow the instructions. Thanks, Stewart-Macdonald, for stocking such a well-engineered product.
I bought a Gold Tone OB 150 Masterclone banjo that is equipped with a Zero Glide nut. This nut is amazing. YES it will help with tone. No more string binding with Zero Glide. Ever notice on a new instrument how when you are tuning up and on occasion you hear a sound like a string is catching in the slot You will not have that issue with Zero Glide. Once you actually play an instrument with a Zero Glide nut you will notice some differences. You may want to outfit all of your stringed instruments to Zero Glide. No need for slot files to set the action at the nut side of the neck. No more smoothing out string slots with high dollar files that snap really easy. No more using graphite or grease on the nut. Zero Glide takes care of that. Might be the first healthy choice for a nut for your instrument. Get one and install it. You will love it.
$39.99
