ZS-15 Slotted Replacement Nut for Guitars

$39.99

Material

Hand

Slots

The Zero Glide Replacement Nut System borrows the "zero fret" concept to reduce string contact in the nut by up to 93%, increasing tuning stability, playability, and open string tone. It only takes a few minutes to install with absolutely no permanent alteration to your instrument. For Guitar.

Also available in Black Delrin.

Free 2-Day Shipping (Continental US Only)
See sizing guide for correct fit.
  • Length: 47.5mm (1-7/8")
  • Radius: 16"
  • Production Height: 9.5mm (3/8")
  • End Height: 8.8mm (11/32")
  • Fingerboard: 7.3mm (9/32")
  • Thickness: 5.9mm (15/64")
  • Fret Sizes: L, M, H, J (.035", .039", .043", .051")
  • String Spacing: 38.5mm (1-33/64")
  • String Gauges: .056", .046", .036", .026", .018", .014"
ZS-15 Slotted Replacement Nut for Guitars
*Measurements in mm
Convert to inches

Reviews

Nice Banjo Upgrade

Apr 18, 2016

The bone nut was easy to install. I sanded the length and depth with a table sander. The instructions are complete and easy to follow. Four zero frets of different sizes are included in the banjo kit--you try the smallest and work your way up until you have no open string buzz. Use medium viscosity cyanoacrylate (available from Stewmac) so you have time to set the nut and fret properly. I'm pleased with the results, improved tone, and hammer-ons and pull-offs are more defined.

Gregory Bell from Review pulled from Stew Macs Zero Glide Product Page
Great product

Dec 31, 2017

My circa 1997 American Standard Strat always had a problem with staying in tune after whammy bar use. I tried pencil graphite and different string sizes with not much luck. I put this nut on and a set of Gotoh locking tuners and now it seems to stay in tune very well.

Jeff from Review pulled from Stew Macs Zero Glide Product Page
Zero Glide Nut

Sep 9, 2015

Great product, Makes a lot of difference in sound and play ability. To say nothing of staying in tune. I put one on a Ovation Legend made in 1972. The guitar always sounded good but was a little tough to play. This made a world of difference. It is now amazing. I have a friend who can't keep his hands off of it. He likes it better than his Rainsong.

PCK from Review pulled from Amazons Zero Glide Product Page
Wonderful addition to my old Yamaha FG-180 Red Label guitar

Nov 3, 2023
The installation was not difficult but it did require patience and good workmanship when shaping the Zero Glide. I bought the black version and really like it's understated appearance.
Jim Edgington Review pulled from Amazons Zero Glide Product Page
Zero Glide on My Old SG

Feb 22, 2017

I had a Zero Glide Zero Fret Nut installed on my 68 Epiphone SG Clone by the luthier who does ALL of my guitar work Scott Thompson at String Craft - here in Memphis . 1st off I have to say that this guitar is one of my go-to guitars the others being my 1964 handmade Mosrite Celebrity Prototype and an early 80 s Mexican Telecaster. Upon getting my guitar back with the new Zero Glide installed I plugged it into my 65 Blackface Deluxe Reverb with a JBL D120f and I was IMMEDIATELY blow away by the improvement in the TONE of this guitar... It was pretty good before BUT now it is piano like ... The tone blew me away not to mention the improvement in ACTION... You see I am a BIG proponent of Zero Frets due to my Mosrite which is the standard by which I judge all others but I was not ready for the massive improvement that was realized by the installation of the Zero Glide Zero Fret Nut on this guitar. I have used this guitar now on a couple of gigs and am STILL blown away. OH tun

Dr. Bill Hudson Review pulled from Amazons Zero Glide Product Page

X